The new is_serdes_configured covers a broader range of devices than the
PCI specific code. Use it instead as we convert away from the
is_fsl_pci_cfg() code.
Additionally move to setting LAWs for PCI based on if its configured.
Also updated PCI FDT fixup code to remove PCI controllers from dtb if
they are configured.
Signed-off-by: Kumar Gala <ga...@kernel.crashing.org>
---
* Added code to handle dynamic LAW setup for PCI
* Added removing of PCI controller nodes from dtb if not cfg
arch/powerpc/cpu/mpc8xxx/pci_cfg.c | 12 ------------
board/freescale/mpc8536ds/law.c | 8 --------
board/freescale/mpc8536ds/mpc8536ds.c | 33 +++++++++++++++++++++++++++++----
3 files changed, 29 insertions(+), 24 deletions(-)
diff --git a/arch/powerpc/cpu/mpc8xxx/pci_cfg.c
b/arch/powerpc/cpu/mpc8xxx/pci_cfg.c
index 85995ca..186936f 100644
--- a/arch/powerpc/cpu/mpc8xxx/pci_cfg.c
+++ b/arch/powerpc/cpu/mpc8xxx/pci_cfg.c
@@ -56,18 +56,6 @@ static struct pci_info pci_config_info[] =
#elif defined(CONFIG_MPC8536)
static struct pci_info pci_config_info[] =
{
- [LAW_TRGT_IF_PCI] = {
- .cfg = 0,
- },
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 2) | (1 << 3) | (1 << 5) | (1 << 7),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 5) | (1 << 7),
- },
- [LAW_TRGT_IF_PCIE_3] = {
- .cfg = (1 << 7),
- },
};
#elif defined(CONFIG_MPC8544)
static struct pci_info pci_config_info[] =
diff --git a/board/freescale/mpc8536ds/law.c b/board/freescale/mpc8536ds/law.c
index 1f11563..61b7454 100644
--- a/board/freescale/mpc8536ds/law.c
+++ b/board/freescale/mpc8536ds/law.c
@@ -28,15 +28,7 @@
#include <asm/mmu.h>
struct law_entry law_table[] = {
- SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
- SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
- SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_PCIE_1),
- SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
- SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_PCIE_2),
- SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
- SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_3),
- SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
};
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c
b/board/freescale/mpc8536ds/mpc8536ds.c
index 253ed18..8daa0c3 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -30,6 +30,7 @@
#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/io.h>
+#include <asm/fsl_serdes.h>
#include <spd.h>
#include <miiphy.h>
#include <libfdt.h>
@@ -219,9 +220,13 @@ void pci_init_board(void)
puts("\n");
#ifdef CONFIG_PCIE3
- pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
+ pcie_configured = is_serdes_configured(PCIE3);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
+ set_next_law(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M,
+ LAW_TRGT_IF_PCIE_3);
+ set_next_law(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K,
+ LAW_TRGT_IF_PCIE_3);
SET_STD_PCIE_INFO(pci_info[num], 3);
pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
printf (" PCIE3 connected to Slot3 as %s (base address
%lx)\n",
@@ -239,9 +244,13 @@ void pci_init_board(void)
#endif
#ifdef CONFIG_PCIE1
- pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+ pcie_configured = is_serdes_configured(PCIE1);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ set_next_law(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_128M,
+ LAW_TRGT_IF_PCIE_1);
+ set_next_law(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K,
+ LAW_TRGT_IF_PCIE_1);
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
printf (" PCIE1 connected to Slot1 as %s (base address
%lx)\n",
@@ -259,9 +268,13 @@ void pci_init_board(void)
#endif
#ifdef CONFIG_PCIE2
- pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
+ pcie_configured = is_serdes_configured(PCIE2);
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
+ set_next_law(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_128M,
+ LAW_TRGT_IF_PCIE_2);
+ set_next_law(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K,
+ LAW_TRGT_IF_PCIE_2);
SET_STD_PCIE_INFO(pci_info[num], 2);
pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
printf (" PCIE2 connected to Slot 2 as %s (base address
%lx)\n",
@@ -285,6 +298,10 @@ void pci_init_board(void)
pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+ set_next_law(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M,
+ LAW_TRGT_IF_PCI);
+ set_next_law(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K,
+ LAW_TRGT_IF_PCI);
SET_STD_PCI_INFO(pci_info[num], 1);
pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address
%lx)\n",
@@ -540,15 +557,23 @@ void ft_board_setup(void *blob, bd_t *bd)
#ifdef CONFIG_PCI1
ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
+#else
+ ft_fsl_pci_setup(blob, "pci0", NULL);
#endif
#ifdef CONFIG_PCIE2
ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
+#else
+ ft_fsl_pci_setup(blob, "pci1", NULL);
#endif
#ifdef CONFIG_PCIE2
ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
+#else
+ ft_fsl_pci_setup(blob, "pci2", NULL);
#endif
#ifdef CONFIG_PCIE1
ft_fsl_pci_setup(blob, "pci3", &pcie3_hose);
+#else
+ ft_fsl_pci_setup(blob, "pci3", NULL);
#endif
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
--
1.6.0.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
