On Apr 28, 2010, at 3:25 AM, Li Yang-R58472 wrote: > >>> Subject: [U-Boot] [PATCH v2 1/2] 85xx/mpc8536ds: Use >>> is_serdes_configured()to determine of PCIe enabled >>> >>> The new is_serdes_configured covers a broader range of >> devices than the >>> PCI specific code. Use it instead as we convert away from the >>> is_fsl_pci_cfg() code. >>> >>> Additionally move to setting LAWs for PCI based on if its configured. >>> Also updated PCI FDT fixup code to remove PCI controllers from dtb if >>> they are configured. >>> >>> Signed-off-by: Kumar Gala <ga...@kernel.crashing.org> >>> --- >>> * Added code to handle dynamic LAW setup for PCI >>> * Added removing of PCI controller nodes from dtb if not cfg >>> >>> arch/powerpc/cpu/mpc8xxx/pci_cfg.c | 12 ------------ >>> board/freescale/mpc8536ds/law.c | 8 -------- >>> board/freescale/mpc8536ds/mpc8536ds.c | 33 >>> +++++++++++++++++++++++++++++---- >> >> Wouldn't it be better to share the PCIE initialization code >> through all the MPC85xx boards? Like in the P2020 serdes >> patch series I proposed last year. What do you think? > > The patch can be referenced at > http://www.mail-archive.com/u-boot@lists.denx.de/msg26339.html > > - Leo
Yeah, we can get there. Just one step at a time. - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot