On Fri, Mar 22, 2019 at 3:09 PM Otavio Salvador <otavio.salva...@ossystems.com.br> wrote: > > Hello Fabio, > > Adding Marek as he is one of USB gods. > > On Fri, Mar 22, 2019 at 3:01 PM Fabio Estevam <feste...@gmail.com> wrote: > > On Fri, Mar 22, 2019 at 2:53 PM Otavio Salvador <ota...@ossystems.com.br> > > wrote: > > So you need to fix the README in two points: > > > > 1. The command "=> dfu 0 mmc 0" must be issued twice: one for the SPL > > and one for u-boot-dtb.img - This error was there prior to your change > > I fail to see why this would be need. Also the 'mmc partconf' does not > affect where the DFU writes the blog (this is changed depending on the > dfu_alt_info line).
Ok, your are right. 'dfu 0 mmc 0' only needs to be issue once. > > 2. The '=> mmc partconf 0 0 0 0' command needs to be issued after the > > last dfu command, not before like you did in this patch. > > Read above. > > I wonder why it works here and fails for you. Are you booting from USB > or eMMC when running the DFU? What version are you using? The mmc partconf order does make a difference here though. I could only flash it when I ran it after the dfu command. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot