On Fri, Mar 22, 2019 at 3:17 PM Fabio Estevam <feste...@gmail.com> wrote: > On Fri, Mar 22, 2019 at 3:09 PM Otavio Salvador > <otavio.salva...@ossystems.com.br> wrote: > > > 2. The '=> mmc partconf 0 0 0 0' command needs to be issued after the > > > last dfu command, not before like you did in this patch. > > > > Read above. > > > > I wonder why it works here and fails for you. Are you booting from USB > > or eMMC when running the DFU? What version are you using? > > The mmc partconf order does make a difference here though. > > I could only flash it when I ran it after the dfu command.
This is a mystery to me; here we did update it several times without it failing. Please try: mmc partconf 0 0 0 0 reset after boot just program it and see if it helps. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot