After switching to DM/DTS support of esdhc3 - the code in this patch
can be removed.
Signed-off-by: Lukasz Majewski <lu...@denx.de>
---
board/k+p/kp_imx53/kp_imx53.c | 46 -------------------------------------------
include/configs/kp_imx53.h | 4 ----
2 files changed, 50 deletions(-)
diff --git a/board/k+p/kp_imx53/kp_imx53.c b/board/k+p/kp_imx53/kp_imx53.c
index 3f21d0b4af..f4d0ad0ef6 100644
--- a/board/k+p/kp_imx53/kp_imx53.c
+++ b/board/k+p/kp_imx53/kp_imx53.c
@@ -13,8 +13,6 @@
#include <asm/arch/iomux-mx53.h>
#include <asm/arch/clock.h>
#include <asm/gpio.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
#include <power/pmic.h>
#include <fsl_pmic.h>
#include "kp_id_rev.h"
@@ -53,50 +51,6 @@ int board_ehci_hcd_init(int port)
}
#endif
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg[] = {
- {MMC_SDHC3_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- return 1; /* eMMC is always present */
-}
-
-#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP)
-#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
- PAD_CTL_DSE_HIGH)
-
-int board_mmc_init(bd_t *bis)
-{
- int ret;
-
- static const iomux_v3_cfg_t sd3_pads[] = {
- NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
- SD_CMD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL),
- };
-
- esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- imx_iomux_v3_setup_multiple_pads(sd3_pads, ARRAY_SIZE(sd3_pads));
-
- ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
- if (ret)
- return ret;
-
- return 0;
-}
-#endif
-
static int power_init(void)
{
struct udevice *dev;
diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h
index f82dcd8426..ca6ab0fabc 100644
--- a/include/configs/kp_imx53.h
+++ b/include/configs/kp_imx53.h
@@ -15,10 +15,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_ESDHC_NUM 1
-
/* USB Configs */
#define CONFIG_USB_EHCI_MX5
#define CONFIG_MXC_USB_PORT 1
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
