As EHCI on i.MX5 has been converted to driver model, the board specific
code, necessary for VBUS USB power supply setup is not needed anymore.
Signed-off-by: Lukasz Majewski <lu...@denx.de>
---
board/k+p/kp_imx53/kp_imx53.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/board/k+p/kp_imx53/kp_imx53.c b/board/k+p/kp_imx53/kp_imx53.c
index f4d0ad0ef6..57d97153dd 100644
--- a/board/k+p/kp_imx53/kp_imx53.c
+++ b/board/k+p/kp_imx53/kp_imx53.c
@@ -17,7 +17,6 @@
#include <fsl_pmic.h>
#include "kp_id_rev.h"
-#define VBUS_PWR_EN IMX_GPIO_NR(7, 8)
#define BOOSTER_OFF IMX_GPIO_NR(2, 23)
#define LCD_BACKLIGHT IMX_GPIO_NR(1, 1)
#define KEY1 IMX_GPIO_NR(2, 26)
@@ -42,15 +41,6 @@ int dram_init_banksize(void)
return 0;
}
-#ifdef CONFIG_USB_EHCI_MX5
-int board_ehci_hcd_init(int port)
-{
- gpio_request(VBUS_PWR_EN, "VBUS_PWR_EN");
- gpio_direction_output(VBUS_PWR_EN, 1);
- return 0;
-}
-#endif
-
static int power_init(void)
{
struct udevice *dev;
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
