Hi Lukasz, > -----Original Message----- > From: Lukasz Majewski [mailto:lu...@denx.de] > Sent: 2019年4月20日 6:18 > To: Peng Fan <peng....@nxp.com> > Cc: Jagan Teki <ja...@amarulasolutions.com>; Stefano Babic > <sba...@denx.de>; Fabio Estevam <fabio.este...@nxp.com>; Simon Glass > <s...@chromium.org>; Tom Rini <tr...@konsulko.com>; Marek Vasut > <marek.vasut+rene...@gmail.com>; Neil Armstrong > <narmstr...@baylibre.com>; Philipp Tomsich > <philipp.toms...@theobroma-systems.com>; Maxime Ripard > <maxime.rip...@bootlin.com>; Michael Trimarchi > <mich...@amarulasolutions.com>; Andre Przywara > <andre.przyw...@arm.com>; U-Boot-Denx <u-boot@lists.denx.de>; > linux-amar...@amarulasolutions.com; dl-uboot-imx <uboot-...@nxp.com> > Subject: Re: [U-Boot] [PATCH v2 00/10] clk: imx: Add i.MX6 CLK support > > On Fri, 19 Apr 2019 08:52:28 +0000 > Peng Fan <peng....@nxp.com> wrote: > > > > On Fri, 19 Apr 2019 11:56:25 +0530 > > > Jagan Teki <ja...@amarulasolutions.com> wrote: > > > > > > > On Fri, Apr 5, 2019 at 2:20 AM Lukasz Majewski <lu...@denx.de> > > > > wrote: > > > > > > > > > > Hi Jagan, > > > > > > > > > > > On Thu, Apr 4, 2019 at 3:31 PM Lukasz Majewski <lu...@denx.de> > > > > > > wrote: > > > > > > > > > > > > > > On Thu, 4 Apr 2019 14:56:36 +0530 Jagan Teki > > > > > > > <ja...@amarulasolutions.com> wrote: > > > > > > > > > > > > > > > On Thu, Apr 4, 2019 at 2:31 PM Lukasz Majewski > > > > > > > > <lu...@denx.de> wrote: > > > > > > > > > > > > > > > > > > On Tue, 2 Apr 2019 16:58:33 +0530 Jagan Teki > > > > > > > > > <ja...@amarulasolutions.com> wrote: > > > > > > > > > > > > > > > > > > > This is revised version of previous i.MX6 clock > > > > > > > > > > management [1]. > > > > > > > > > > > > > > > > > > > > The main difference between previous version is > > > > > > > > > > - Group the i.MX6 ccm clocks into gates and tree > > > > > > > > > > instead of handling the clocks in simple way using > > > > > > > > > > case statement. > > > > > > > > > > - use gate clocks for enable/disable management. > > > > > > > > > > - use tree clocks for get/set rate or parent traverse > > > > > > > > > > management. > > > > > > > > > > - parent clock handling via clock type. > > > > > > > > > > - traverse the parent clock using recursive > > > > > > > > > > functionlaity. > > > > > > > > > > > > > > > > > > > > The main motive behind this tree framework is to make > > > > > > > > > > the clock tree management simple and useful for U-Boot > > > > > > > > > > requirements instead of garbing Linux clock management > > > > > > > > > > code. > > > > > > > > > > > > > > > > > > > > We are trying to manage the Allwinner clocks with > > > > > > > > > > similar kind, so having this would really help i.MX6 > > > > > > > > > > as well. > > > > > > > > > > > > > > > > > > > > Added simple names for clock macros, but will update > > > > > > > > > > it in future version. > > > > > > > > > > > > > > > > > > > > I have skipped ENET clocks from previous series, will > > > > > > > > > > add it in future patches. > > > > > > > > > > > > > > > > > > > > Changes for v2: > > > > > > > > > > - changed framework patches. > > > > > > > > > > - add support for imx6qdl and imx6ul boards > > > > > > > > > > - add clock gates, tree. > > > > > > > > > > > > > > > > > > > > [1] https://patchwork.ozlabs.org/cover/950964/ > > > > > > > > > > > > > > > > > > > > Any inputs? > > > > > > > > > > > > > > > > > > Hmm.... It looks like we are doing some development in > > > > > > > > > parallel. > > > > > > > > > > > > > > > > > > Please look into following commit [1]: > > > > > > > > > https://patchwork.ozlabs.org/patch/1034051/ > > > > > > > > > > > > > > > > > > It ports from Linux 5.0 the CCF framework for iMX6Q, > > > > > > > > > which IMHO in the long term is a better approach. > > > > > > > > > The code is kept simple and resembles the code from > > > > > > > > > Barebox. > > > > > > > > > > > > > > > > > > Please correct me if I'm wrong, but the code from your > > > > > > > > > work is not modeling muxes, gates and other components > > > > > > > > > from Linux CCF. > > > > > > > > > > > > > > > > The U-Boot implementation of CLK would require as minimal > > > > > > > > and simple as possible due to requirement of U-Boot > > > > > > > > itself. Hope you agree this point? > > > > > > > > > > > > > > Now i.MX6 is using clock.c CLK implementation. If we decide > > > > > > > to replace it - we shall do it in a way, which would allow > > > > > > > us to follow Linux kernel. (the barebox implementation is a > > > > > > > stripped CCF from Linux, the same is in patch [1]). > > > > > > > > > > > > > > > if yes having CCF stack code to handle all clock with > > > > > > > > respective separate drivers management is may not require > > > > > > > > as of now, IMHO. > > > > > > > > > > > > > > I do have a gut feeling, that we will end up with the need > > > > > > > to have the CCF framework ported anyway. As for example > > > > > > > imx7/8 can re-use muxes, gates code. > > > > > > > > > > > > As per my experience the main the over-ahead to handle clocks > > > > > > in U-Boot if we go with separate clock drivers is for Video > > > > > > and Ethernet peripherals. these are key IP's which use more > > > > > > clocks from U-Boot point-of-view, others can be handle pretty > > > > > > straight-forward unless if they don't have too much tree > > > > > > chain. > > > > > > > > > > > > On this series, the tree management is already supported ENET > > > > > > in i.MX6, and Allwinner platforms. > > > > > > > > > > > > As of now, I'm thinking I can handle reset of the clocks with > > > > > > similar way. > > > > > > > > > > But this code also supports ENET and ESDHCI clocks on i.MX6Q (as > > > > > supporting those was the motivator for this work). > > > > > > > > > > One important thing to be aware of - the problem with SPL's > > > > > footprint. The implementation with clock.c is small and simple, > > > > > but doesn't scale well. > > > > > > > > > > > > > > > > > > > > > > > > > However, those are only my "feelings" after a glimpse look > > > > > > > - I will look into your code more thoroughly and provide > > > > > > > feedback. > > > > > > > > > > > > Please have a look, if possible check even the code size by > > > > > > adding USDHC clocks. > > > > > > > > > > Yes, code size (especially in SPL) is an _important_ factor > > > > > here. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > This series is using recursive calls for handling > > > > > > > > parenting stuff to handle get or set rates, which is fine > > > > > > > > for handling clock tree management as far as U-Boot > > > > > > > > point-of-view. We have faced similar situation as I > > > > > > > > explained in commit message about Allwinner clocks [2] and > > > > > > > > we ended up going this way. > > > > > > > > > > > > > > I'm not Allwinner expert - but if I may ask - how far away > > > > > > > is this implementation from mainline Linux kernel? > > > > > > > > > > > > > > How difficult is it to port the new code (or update it)? > > > > > > > > > > > > Allwinner clocks also has similar gates, muxs, and with other > > > > > > platform stuff which has too much scope in Linux to use CCM. > > > > > > > > > > For example the barebox managed to get subset of Linux CCF > > > > > ported, without loosing the CCF similarity. > > > > > > > > > > > > > > > Important factors/requirements for the i.MX clock code: > > > > > > > > > > 1. Easy maintenance in long-term > > > > > > > > > > 2. Reusing the code in SPL (with a very important factor of > > > > > _code_size_). > > > > > > > > > > 3. Reuse the code for other i.MX SoCs (imx7, imx8) > > > > > > > > > > 4. Effort needed to use DM with this code > > > > > > > > I understand your points, I was managed this series based on these > > > > requirements as well. > > > > > > Ok. > > > > > > Could you share the delta of footprint size (u-boot.img/SPL) with > > > and without your patch (on imx6q) ? > > > > > > In my case the CCF caused increase of u-boot.img proper (as it was > > > not yet adapted to SPL): > > > > > > 415KiB -> 421KiB = 6KiB increase of size (< 2%). > > > > > > (This can be further reduced by using OF_PLATDATA). > > > > > > This CCF code hasn't been ported to SPL (yet) > > > > > > > We even consider the foot-print, atleast for recursive calls of > > > > handling parenting scale well. > > > > > > With CCF porting v3 I'm going to provide some caching, so the > > > descending would be done at most once. > > > > > > > May be we can > > > > consider to design based on this as per U-Boot. > > > > > > > > > > Please look into point 1. Having code ported from Linux is IMHO > > > better in the long term. > > > > Agree. > > > > > > > > > Let me come-back with another series or do you have any inputs or > > > > questions, please post it. > > > > > > I will post CCF port for imx6q v3 in a few days. > > > > Looking forward your new patchset. > > Working on enabling i.MX8MM CCF support. > > Output of 'dm tree' on imx6q: > > clk 1 [ ] fixed_rate_clock |-- ckil > clk 2 [ ] fixed_rate_clock |-- ckih1 > clk 3 [ + ] fixed_rate_clock `-- osc > clk 4 [ + ] imx_clk_pllv3 |-- pll2_bus > clk 7 [ ] imx_clk_pfd | |-- > pll2_pfd0_352m > clk 8 [ + ] imx_clk_pfd | `-- > pll2_pfd2_396m > clk 9 [ + ] imx_clk_mux | |-- > usdhc1_sel > clk 13 [ + ] imx_clk_divider | | `-- > usdhc1_podf > clk 22 [ ] imx_clk_gate2 | | > `-- usdhc1 > clk 10 [ + ] imx_clk_mux | |-- > usdhc2_sel > clk 14 [ + ] imx_clk_divider | | `-- > usdhc2_podf > clk 23 [ ] imx_clk_gate2 | | > `-- usdhc2 > clk 11 [ + ] imx_clk_mux | |-- > usdhc3_sel > clk 15 [ + ] imx_clk_divider | | `-- > usdhc3_podf > clk 24 [ ] imx_clk_gate2 | | > `-- usdhc3 > clk 12 [ + ] imx_clk_mux | `-- > usdhc4_sel > clk 16 [ + ] imx_clk_divider | `-- > usdhc4_podf > clk 25 [ ] imx_clk_gate2 | > `-- usdhc4 > clk 5 [ + ] imx_clk_pllv3 `-- pll3_usb_otg > clk 6 [ + ] imx_clk_fixed_factor `-- pll3_60m > clk 17 [ + ] imx_clk_divider `-- > ecspi_root > clk 18 [ ] imx_clk_gate2 |-- > ecspi1 > clk 19 [ ] imx_clk_gate2 |-- > ecspi2 > clk 20 [ ] imx_clk_gate2 |-- > ecspi3 > clk 21 [ ] imx_clk_gate2 `-- > ecspi4 >
Do you have a public tree/branch for CCF? I am adding imx8mm clk and would like to base on your tree. I think need to extend clk_ops to support mux/divider, but not just get rate. To avoid conflict with you work, if you have a public tree, that could be good. Thanks, Peng. > > > > > > Regards, > > Peng. > > > > > > > > > > > > > Jagan. > > > > > > > > > > > > > > > Best regards, > > > > > > Lukasz Majewski > > > > > > -- > > > > > > DENX Software Engineering GmbH, Managing Director: Wolfgang > > > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, > > > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: > > > lu...@denx.de > > > > > Best regards, > > Lukasz Majewski > > -- > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: > lu...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot