> Subject: Re: Booting MX6 via Serial Download after DM conversion > > Hi Peng, > > On Thu, Apr 25, 2019 at 4:17 AM Peng Fan <peng....@nxp.com> wrote: > > > After check, it is not U-Boot issue, it is imx_usb should update to support > new u-boot-dtb.img. > > > > With your patch, file u-boot-dtb.img > > u-boot-dtb.img: u-boot legacy uImage, U-Boot > > 2019.04-00664-gdbe9a81ff0\270, Firmware/ARM, Firmware Image (Not > compressed), 490914 bytes, Thu Apr 25 07:26:46 2019, Load Address: > > 0x17800000, Entry Point: 0x00000000, Header CRC: 0xCBE07038, Data > CRC: > > 0x2C710405 > > > > without your patch, file u-boot-dtb.img > > u-boot-dtb.img: Device Tree Blob version 17, size=1399, boot CPU=0, > > string block size=139, DT structure block size=1204 > > > > Actually now u-boot-dtb.img is a FIT image with a device tree wrapper. > > So need fix imx_usb to support both legacy and new image format. > > This issue also affects the UUU tool as well. > > Is there a fix for UUU?
NXP software not enable SPL for this board, so I think UUU might not support it. But UUU support SPL + FIT for i.MX8MM, uuu might work for this board. I do not have time to check uuu side recently. Let me check whether others have time on this. Regards, Peng. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot