Hi Fabio, Tested-by Joris Offouga <offougajo...@gmail.com>
BR, Joris Le ven. 3 mai 2019 à 19:20, Pierre-Jean Texier <pjtex...@koncepto.io> a écrit : > Hi Fabio, > > Le 03/05/2019 à 19:05, Fabio Estevam a écrit : > > Commit 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to > > simple-bus driver") causes some i.MX boards that were converted > > to DM, such as warp7, to fail to boot. > > > > As explained by Lukas Auer: > > > > "With the patch, U-Boot probes the drivers for devices under simple-bus > > device tree nodes in the pre-relocation device model. The default value > > of CONFIG_SYS_MALLOC_F_LEN (0x400) leaves U-Boot with not enough memory > to > > do this, causing it to hang." > > > > Fix this problem by providing a convenient default value for > > CONFIG_SYS_MALLOC_F_LEN. > > > > Reported-by: Pierre-Jean Texier <pjtex...@koncepto.io> > > Suggested-by: Lukas Auer <lukas.a...@aisec.fraunhofer.de> > > Signed-off-by: Fabio Estevam <feste...@gmail.com> > > --- > > Changes since v1: > > - Move the default setting to the main Kconfig and make it depend > > on i.MX > > > > Kconfig | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/Kconfig b/Kconfig > > index 7a5491bd67..fd4ff42c17 100644 > > --- a/Kconfig > > +++ b/Kconfig > > @@ -138,6 +138,8 @@ config SYS_MALLOC_F_LEN > > depends on SYS_MALLOC_F > > default 0x1000 if AM33XX > > default 0x2800 if SANDBOX > > + default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \ > > + ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5) > > default 0x400 > > help > > Before relocation, memory is very limited on many platforms. > Still, > > > Tested-by: Pierre-Jean Texier <pjtex...@koncepto.io> > > > Thanks > > Pierre-Jean > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot