Hello Fabio, Am 03.05.2019 um 19:05 schrieb Fabio Estevam:
Commit 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to simple-bus driver") causes some i.MX boards that were converted to DM, such as warp7, to fail to boot.As explained by Lukas Auer: "With the patch, U-Boot probes the drivers for devices under simple-bus device tree nodes in the pre-relocation device model. The default value of CONFIG_SYS_MALLOC_F_LEN (0x400) leaves U-Boot with not enough memory to do this, causing it to hang." Fix this problem by providing a convenient default value for CONFIG_SYS_MALLOC_F_LEN. Reported-by: Pierre-Jean Texier <pjtex...@koncepto.io> Suggested-by: Lukas Auer <lukas.a...@aisec.fraunhofer.de> Signed-off-by: Fabio Estevam <feste...@gmail.com> --- Changes since v1: - Move the default setting to the main Kconfig and make it depend on i.MX Kconfig | 2 ++ 1 file changed, 2 insertions(+)
Thanks for this fix! This solves my issue with patch [PATCH] simple-bus: add DM_FLAG_PRE_RELOC flag to simple-bus driver on a not yet mainlined imx6ull based board. Tested-by: Heiko Schocher <h...@denx.de> bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: h...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
