> -----Original Message----- > From: Jagan Teki <ja...@amarulasolutions.com> > Sent: 2019年5月6日 15:03 > To: Chuanhua Han <chuanhua....@nxp.com> > Cc: Jagan Teki <ja...@openedev.com>; Wolfgang Denk <w...@denx.de>; > Shengzhou Liu <shengzhou....@nxp.com>; Ruchika Gupta > <ruchika.gu...@nxp.com>; U-Boot-Denx <u-boot@lists.denx.de>; Jiafei Pan > <jiafei....@nxp.com>; Yinbo Zhu <yinbo....@nxp.com> > Subject: Re: [EXT] Re: [U-Boot] [PATCH 2/5] dm: spi: Convert Freescale ESPI > driver to driver model > > Caution: EXT Email > > On Mon, May 6, 2019 at 12:29 PM Chuanhua Han <chuanhua....@nxp.com> > wrote: > > > > > > > > > -----Original Message----- > > > From: Jagan Teki <ja...@amarulasolutions.com> > > > Sent: 2019年4月26日 2:07 > > > To: Chuanhua Han <chuanhua....@nxp.com> > > > Cc: Jagan Teki <ja...@openedev.com>; Wolfgang Denk <w...@denx.de>; > > > Shengzhou Liu <shengzhou....@nxp.com>; Ruchika Gupta > > > <ruchika.gu...@nxp.com>; U-Boot-Denx <u-boot@lists.denx.de>; Jiafei > > > Pan <jiafei....@nxp.com>; Yinbo Zhu <yinbo....@nxp.com> > > > Subject: Re: [EXT] Re: [U-Boot] [PATCH 2/5] dm: spi: Convert > > > Freescale ESPI driver to driver model > > > > > > Caution: EXT Email > > > > > > On Thu, Apr 25, 2019 at 8:27 AM Chuanhua Han > <chuanhua....@nxp.com> > > > wrote: > > > > > > > > Hi,jagan > > > > Thank you for your replay! > > > > > > > > > -----Original Message----- > > > > > From: Jagan Teki <ja...@amarulasolutions.com> > > > > > Sent: 2019年4月24日 14:57 > > > > > To: Chuanhua Han <chuanhua....@nxp.com> > > > > > Cc: Jagan Teki <ja...@openedev.com>; Wolfgang Denk <w...@denx.de>; > > > > > Shengzhou Liu <shengzhou....@nxp.com>; Ruchika Gupta > > > > > <ruchika.gu...@nxp.com>; U-Boot-Denx <u-boot@lists.denx.de>; > > > > > Jiafei Pan <jiafei....@nxp.com>; Yinbo Zhu <yinbo....@nxp.com> > > > > > Subject: [EXT] Re: [U-Boot] [PATCH 2/5] dm: spi: Convert > > > > > Freescale ESPI driver to driver model > > > > > > > > > > WARNING: This email was created outside of NXP. DO NOT CLICK > > > > > links or attachments unless you recognize the sender and know > > > > > the content is > > > safe. > > > > > > > > > > > > > > > > > > > > On Tue, Apr 23, 2019 at 4:17 PM Chuanhua Han > > > <chuanhua....@nxp.com> > > > > > wrote: > > > > > > > > > > > > Modify the Freescale ESPI driver to support the driver model. > > > > > > Also resolved the following problems: > > > > > > > > > > > > ===================== WARNING ====================== This > > > > > > board > > > > > does > > > > > > not use CONFIG_DM_SPI. Please update the board before v2019.04 > > > > > > for no dm conversion and v2019.07 for partially dm converted > > > > > > drivers. > > > > > > Failure to update can lead to driver/board removal See > > > > > > doc/driver-model/MIGRATION.txt for more info. > > > > > > ==================================================== > > > > > > ===================== WARNING ====================== This > > > > > > board > > > > > does > > > > > > not use CONFIG_DM_SPI_FLASH. Please update the board to use > > > > > > CONFIG_SPI_FLASH before the v2019.07 release. > > > > > > Failure to update by the deadline may result in board removal. > > > > > > See doc/driver-model/MIGRATION.txt for more info. > > > > > > ==================================================== > > > > > > > > > > > > Signed-off-by: Chuanhua Han <chuanhua....@nxp.com> > > > > > > --- > > > > > > depends on: > > > > > > - > > > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2 > > > > > > F%2F > > > > > > patc > > > > > > > > > > > > > > > hwork.ozlabs.org%2Fproject%2Fuboot%2Flist%2F%3Fseries%3D99439&d > > > > > ata > > > > > > > > > > > > > > > =02%7C01%7Cchuanhua.han%40nxp.com%7Cfa6bdd7859c4411b5d8608d6c8 > > > > > 8223e3%7 > > > > > > > > > > > > > > > C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C63691685860819371 > > > > > 5&sda > > > > > > > > > > > > > > > ta=437CqPexTmJAzhl7wZ3lAUQVbmy%2B2NvHlurTcGTJKT0%3D&reserve > > > > > d=0 > > > > > > > > > > > > drivers/spi/fsl_espi.c | 450 > > > > > > +++++++++++++++++++++++++++++------------ > > > > > > 1 file changed, 316 insertions(+), 134 deletions(-) > > > > > > > > > > > > diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c > > > > > > index 7444ae1a06..6ebe57c30b 100644 > > > > > > --- a/drivers/spi/fsl_espi.c > > > > > > +++ b/drivers/spi/fsl_espi.c > > > > > > @@ -4,17 +4,27 @@ > > > > > > * > > > > > > * Copyright 2010-2011 Freescale Semiconductor, Inc. > > > > > > * Author: Mingkai Hu (mingkai...@freescale.com) > > > > > > + * Chuanhua Han (chuanhua....@nxp.com) > > > > > > */ > > > > > > > > > > > > #include <common.h> > > > > > > - > > > > > > #include <malloc.h> > > > > > > #include <spi.h> > > > > > > #include <asm/immap_85xx.h> > > > > > > +#include <dm.h> > > > > > > +#include <errno.h> > > > > > > +#include <fdtdec.h> > > > > > > + > > > > > > +struct fsl_espi_platdata { > > > > > > + uint flags; > > > > > > + uint speed_hz; > > > > > > + uint num_chipselect; > > > > > > + fdt_addr_t regs_addr; > > > > > > +}; > > > > > > > > > > > > -struct fsl_spi_slave { > > > > > > - struct spi_slave slave; > > > > > > +struct fsl_espi_priv { > > > > > > ccsr_espi_t *espi; > > > > > > + u32 speed_hz; > > > > > > unsigned int div16; > > > > > > unsigned int pm; > > > > > > int tx_timeout; > > > > > > @@ -25,9 +35,18 @@ struct fsl_spi_slave { > > > > > > unsigned int max_transfer_length; > > > > > > }; > > > > > > > > > > > > +struct fsl_spi_slave { > > > > > > + struct spi_slave slave; > > > > > > + struct fsl_espi_priv priv; }; > > > > > > + > > > > > > #define to_fsl_spi_slave(s) container_of(s, struct > > > > > > fsl_spi_slave, > > > > > > slave) > > > > > > +#define to_fsl_spi_priv(p) container_of(p, struct > > > > > > +fsl_spi_slave, > > > > > > +priv) > > > > > > #define US_PER_SECOND 1000000UL > > > > > > > > > > > > +/* default SCK frequency, unit: HZ */ > > > > > > +#define FSL_ESPI_DEFAULT_SCK_FREQ 10000000 > > > > > > + > > > > > > #define ESPI_MAX_CS_NUM 4 > > > > > > #define ESPI_FIFO_WIDTH_BIT 32 > > > > > > > > > > > > @@ -62,121 +81,46 @@ struct fsl_spi_slave { > > > > > > > > > > > > #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 > > > > > > > > > > > > -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int > > > > > > cs, > > > > > > - unsigned int max_hz, unsigned int mode) > > > > > > -{ > > > > > > - struct fsl_spi_slave *fsl; > > > > > > - sys_info_t sysinfo; > > > > > > - unsigned long spibrg = 0; > > > > > > - unsigned long spi_freq = 0; > > > > > > - unsigned char pm = 0; > > > > > > - > > > > > > - if (!spi_cs_is_valid(bus, cs)) > > > > > > - return NULL; > > > > > > - > > > > > > - fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); > > > > > > - if (!fsl) > > > > > > - return NULL; > > > > > > - > > > > > > - fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); > > > > > > - fsl->mode = mode; > > > > > > - fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; > > > > > > - > > > > > > - /* Set eSPI BRG clock source */ > > > > > > - get_sys_info(&sysinfo); > > > > > > - spibrg = sysinfo.freq_systembus / 2; > > > > > > - fsl->div16 = 0; > > > > > > - if ((spibrg / max_hz) > 32) { > > > > > > - fsl->div16 = ESPI_CSMODE_DIV16; > > > > > > - pm = spibrg / (max_hz * 16 * 2); > > > > > > - if (pm > 16) { > > > > > > - pm = 16; > > > > > > - debug("Requested speed is too low: %d > > > Hz, %ld > > > > > Hz " > > > > > > - "is used.\n", max_hz, spibrg / (32 > * > > > 16)); > > > > > > - } > > > > > > - } else > > > > > > - pm = spibrg / (max_hz * 2); > > > > > > - if (pm) > > > > > > - pm--; > > > > > > - fsl->pm = pm; > > > > > > - > > > > > > - if (fsl->div16) > > > > > > - spi_freq = spibrg / ((pm + 1) * 2 * 16); > > > > > > - else > > > > > > - spi_freq = spibrg / ((pm + 1) * 2); > > > > > > - > > > > > > - /* set tx_timeout to 10 times of one espi FIFO entry go out > */ > > > > > > - fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * > > > > > ESPI_FIFO_WIDTH_BIT > > > > > > - * 10), spi_freq); > > > > > > - > > > > > > - return &fsl->slave; > > > > > > -} > > > > > > - > > > > > > -void spi_free_slave(struct spi_slave *slave) > > > > > > +#ifndef CONFIG_DM_SPI > > > > > > > > > > Would you try for full dm-conversion? it would be hard to move > > > > > all respective defconfigs to use but better try since we have > > > > > next version deadline for full dm-conversion. thanks! > > > > Currently my espi driver is modified to be compatible with dm > > > > configuration and non-dm configuration. > > > > If uboot don't need non-dm code in the future, I will remove this > > > > compatibility and only keep the dm driver code. Thank you. > > > > > > Idea is to make fully dm supported and ie what we have migration > > > deadline, doc/driver-model/MIGRATION.txt > > Do you mean that I need to delete the original non-dm code? > > Or there are some values in the dm code that do not come from dts! > > Can you tell me something about it? Thank you! > > If not dt, can be done via platdata, we have few drivers with similar support > drivers/spi/pl022_spi.c > > Check the same and let me know for any help. Can we merge the mainline of uboot first? Looking forward to your reply!
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot