> -----Original Message-----
> From: Jagan Teki <ja...@amarulasolutions.com>
> Sent: 2019年5月23日 12:38
> To: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
> Cc: Chuanhua Han <chuanhua....@nxp.com>; U-Boot-Denx
> <u-boot@lists.denx.de>; Jiafei Pan <jiafei....@nxp.com>; Jagan Teki
> <ja...@openedev.com>; Yinbo Zhu <yinbo....@nxp.com>; Ruchika Gupta
> <ruchika.gu...@nxp.com>; Xiaobo Xie <xiaobo....@nxp.com>; Rajan
> Srivastava <rajan.srivast...@nxp.com>
> Subject: Re: [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI
> driver to driver model
>
> Caution: EXT Email
>
> On Wed, May 22, 2019 at 10:23 PM Prabhakar Kushwaha
> <prabhakar.kushw...@nxp.com> wrote:
> >
> > Dear Chuanhua, Jagan,
> >
> > > -----Original Message-----
> > > From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Chuanhua
> > > Han
> > > Sent: Thursday, May 9, 2019 9:03 AM
> > > To: Jagan Teki <ja...@amarulasolutions.com>
> > > Cc: U-Boot-Denx <u-boot@lists.denx.de>; Jiafei Pan
> > > <jiafei....@nxp.com>; Jagan Teki <ja...@openedev.com>; Yinbo Zhu
> > > <yinbo....@nxp.com>; Ruchika Gupta <ruchika.gu...@nxp.com>
> > > Subject: Re: [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert
> > > Freescale ESPI driver to driver model
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: Jagan Teki <ja...@amarulasolutions.com>
> > > > Sent: 2019年5月6日 15:03
> > > > To: Chuanhua Han <chuanhua....@nxp.com>
> > > > Cc: Jagan Teki <ja...@openedev.com>; Wolfgang Denk <w...@denx.de>;
> > > > Shengzhou Liu <shengzhou....@nxp.com>; Ruchika Gupta
> > > > <ruchika.gu...@nxp.com>; U-Boot-Denx <u-boot@lists.denx.de>;
> > > > Jiafei Pan <jiafei....@nxp.com>; Yinbo Zhu <yinbo....@nxp.com>
> > > > Subject: Re: [EXT] Re: [U-Boot] [PATCH 2/5] dm: spi: Convert
> > > > Freescale ESPI driver to driver model
> > > >
> > > > Caution: EXT Email
> > > >
> > > > On Mon, May 6, 2019 at 12:29 PM Chuanhua Han
> > > > <chuanhua....@nxp.com>
> > > > wrote:
> > > > >
> > > > >
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Jagan Teki <ja...@amarulasolutions.com>
> > > > > > Sent: 2019年4月26日 2:07
> > > > > > To: Chuanhua Han <chuanhua....@nxp.com>
> > > > > > Cc: Jagan Teki <ja...@openedev.com>; Wolfgang Denk
> > > > > > <w...@denx.de>; Shengzhou Liu <shengzhou....@nxp.com>; Ruchika
> > > > > > Gupta <ruchika.gu...@nxp.com>; U-Boot-Denx
> > > > > > <u-boot@lists.denx.de>; Jiafei Pan <jiafei....@nxp.com>; Yinbo
> > > > > > Zhu <yinbo....@nxp.com>
> > > > > > Subject: Re: [EXT] Re: [U-Boot] [PATCH 2/5] dm: spi: Convert
> > > > > > Freescale ESPI driver to driver model
> > > > > >
> > > > > > Caution: EXT Email
> > > > > >
> > > > > > On Thu, Apr 25, 2019 at 8:27 AM Chuanhua Han
> > > > <chuanhua....@nxp.com>
> > > > > > wrote:
> > > > > > >
> > > > > > > Hi,jagan
> > > > > > > Thank you for your replay!
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Jagan Teki <ja...@amarulasolutions.com>
> > > > > > > > Sent: 2019年4月24日 14:57
> > > > > > > > To: Chuanhua Han <chuanhua....@nxp.com>
> > > > > > > > Cc: Jagan Teki <ja...@openedev.com>; Wolfgang Denk
> > > > > > > > <w...@denx.de>; Shengzhou Liu <shengzhou....@nxp.com>;
> > > > > > > > Ruchika Gupta <ruchika.gu...@nxp.com>; U-Boot-Denx
> > > > > > > > <u-boot@lists.denx.de>; Jiafei Pan <jiafei....@nxp.com>;
> > > > > > > > Yinbo Zhu <yinbo....@nxp.com>
> > > > > > > > Subject: [EXT] Re: [U-Boot] [PATCH 2/5] dm: spi: Convert
> > > > > > > > Freescale ESPI driver to driver model
> > > > > > > >
> > > > > > > > WARNING: This email was created outside of NXP. DO NOT
> > > > > > > > CLICK links or attachments unless you recognize the sender
> > > > > > > > and know the content is
> > > > > > safe.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > On Tue, Apr 23, 2019 at 4:17 PM Chuanhua Han
> > > > > > <chuanhua....@nxp.com>
> > > > > > > > wrote:
> > > > > > > > >
> > > > > > > > > Modify the Freescale ESPI driver to support the driver model.
> > > > > > > > > Also resolved the following problems:
> > > > > > > > >
> > > > > > > > > ===================== WARNING ======================
> > > > > > > > > This board
> > > > > > > > does
> > > > > > > > > not use CONFIG_DM_SPI. Please update the board before
> > > > > > > > > v2019.04 for no dm conversion and v2019.07 for partially
> > > > > > > > > dm
> > > converted drivers.
> > > > > > > > > Failure to update can lead to driver/board removal See
> > > > > > > > > doc/driver-model/MIGRATION.txt for more info.
> > > > > > > > > ====================================================
> > > > > > > > > ===================== WARNING ======================
> > > > > > > > > This board
> > > > > > > > does
> > > > > > > > > not use CONFIG_DM_SPI_FLASH. Please update the board to
> > > > > > > > > use CONFIG_SPI_FLASH before the v2019.07 release.
> > > > > > > > > Failure to update by the deadline may result in board removal.
> > > > > > > > > See doc/driver-model/MIGRATION.txt for more info.
> > > > > > > > > ====================================================
> > > > > > > > >
> > > > > > > > > Signed-off-by: Chuanhua Han <chuanhua....@nxp.com>
> > > > > > > > > ---
> > > > > > > > > depends on:
> > > > > > > > > -
> > > > > > > > > https://eur01.safelinks.protection.outlook.com/?url=http
> > > > > > > > > s%3A
> > > > > > > > > %2
> > > > > > > > > F%2F
> > > > > > > > > patc
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> hwork.ozlabs.org%2Fproject%2Fuboot%2Flist%2F%3Fseries%3D99439&
> > > > d
> > > > > > > > ata
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> =02%7C01%7Cchuanhua.han%40nxp.com%7Cfa6bdd7859c4411b5d8608d6c8
> > > > > > > > 8223e3%7
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C63691685860819371
> > > > > > > > 5&sda
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ta=437CqPexTmJAzhl7wZ3lAUQVbmy%2B2NvHlurTcGTJKT0%3D&reserve
> > > > > > > > d=0
> > > > > > > > >
> > > > > > > > > drivers/spi/fsl_espi.c | 450
> > > > > > > > > +++++++++++++++++++++++++++++------------
> > > > > > > > > 1 file changed, 316 insertions(+), 134 deletions(-)
> > > > > > > > >
> > > > > > > > > diff --git a/drivers/spi/fsl_espi.c
> > > > > > > > > b/drivers/spi/fsl_espi.c index 7444ae1a06..6ebe57c30b
> > > > > > > > > 100644
> > > > > > > > > --- a/drivers/spi/fsl_espi.c
> > > > > > > > > +++ b/drivers/spi/fsl_espi.c
> > > > > > > > > @@ -4,17 +4,27 @@
> > > > > > > > > *
> > > > > > > > > * Copyright 2010-2011 Freescale Semiconductor, Inc.
> > > > > > > > > * Author: Mingkai Hu (mingkai...@freescale.com)
> > > > > > > > > + * Chuanhua Han (chuanhua....@nxp.com)
> > > > > > > > > */
> > > > > > > > >
> > > > > > > > > #include <common.h>
> > > > > > > > > -
> > > > > > > > > #include <malloc.h>
> > > > > > > > > #include <spi.h>
> > > > > > > > > #include <asm/immap_85xx.h>
> > > > > > > > > +#include <dm.h>
> > > > > > > > > +#include <errno.h>
> > > > > > > > > +#include <fdtdec.h>
> > > > > > > > > +
> > > > > > > > > +struct fsl_espi_platdata {
> > > > > > > > > + uint flags;
> > > > > > > > > + uint speed_hz;
> > > > > > > > > + uint num_chipselect;
> > > > > > > > > + fdt_addr_t regs_addr; };
> > > > > > > > >
> > > > > > > > > -struct fsl_spi_slave {
> > > > > > > > > - struct spi_slave slave;
> > > > > > > > > +struct fsl_espi_priv {
> > > > > > > > > ccsr_espi_t *espi;
> > > > > > > > > + u32 speed_hz;
> > > > > > > > > unsigned int div16;
> > > > > > > > > unsigned int pm;
> > > > > > > > > int tx_timeout;
> > > > > > > > > @@ -25,9 +35,18 @@ struct fsl_spi_slave {
> > > > > > > > > unsigned int max_transfer_length;
> > > > > > > > > };
> > > > > > > > >
> > > > > > > > > +struct fsl_spi_slave {
> > > > > > > > > + struct spi_slave slave;
> > > > > > > > > + struct fsl_espi_priv priv; };
> > > > > > > > > +
> > > > > > > > > #define to_fsl_spi_slave(s) container_of(s, struct
> > > > > > > > > fsl_spi_slave,
> > > > > > > > > slave)
> > > > > > > > > +#define to_fsl_spi_priv(p) container_of(p, struct
> > > > > > > > > +fsl_spi_slave,
> > > > > > > > > +priv)
> > > > > > > > > #define US_PER_SECOND 1000000UL
> > > > > > > > >
> > > > > > > > > +/* default SCK frequency, unit: HZ */
> > > > > > > > > +#define FSL_ESPI_DEFAULT_SCK_FREQ 10000000
> > > > > > > > > +
> > > > > > > > > #define ESPI_MAX_CS_NUM 4
> > > > > > > > > #define ESPI_FIFO_WIDTH_BIT 32
> > > > > > > > >
> > > > > > > > > @@ -62,121 +81,46 @@ struct fsl_spi_slave {
> > > > > > > > >
> > > > > > > > > #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0
> > > > > > > > >
> > > > > > > > > -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned
> > > > > > > > > int
> cs,
> > > > > > > > > - unsigned int max_hz, unsigned int mode)
> > > > > > > > > -{
> > > > > > > > > - struct fsl_spi_slave *fsl;
> > > > > > > > > - sys_info_t sysinfo;
> > > > > > > > > - unsigned long spibrg = 0;
> > > > > > > > > - unsigned long spi_freq = 0;
> > > > > > > > > - unsigned char pm = 0;
> > > > > > > > > -
> > > > > > > > > - if (!spi_cs_is_valid(bus, cs))
> > > > > > > > > - return NULL;
> > > > > > > > > -
> > > > > > > > > - fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs);
> > > > > > > > > - if (!fsl)
> > > > > > > > > - return NULL;
> > > > > > > > > -
> > > > > > > > > - fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR);
> > > > > > > > > - fsl->mode = mode;
> > > > > > > > > - fsl->max_transfer_length =
> ESPI_MAX_DATA_TRANSFER_LEN;
> > > > > > > > > -
> > > > > > > > > - /* Set eSPI BRG clock source */
> > > > > > > > > - get_sys_info(&sysinfo);
> > > > > > > > > - spibrg = sysinfo.freq_systembus / 2;
> > > > > > > > > - fsl->div16 = 0;
> > > > > > > > > - if ((spibrg / max_hz) > 32) {
> > > > > > > > > - fsl->div16 = ESPI_CSMODE_DIV16;
> > > > > > > > > - pm = spibrg / (max_hz * 16 * 2);
> > > > > > > > > - if (pm > 16) {
> > > > > > > > > - pm = 16;
> > > > > > > > > - debug("Requested speed is too
> low: %d
> > > > > > Hz, %ld
> > > > > > > > Hz "
> > > > > > > > > - "is used.\n", max_hz, spibrg
> / (32
> > > > *
> > > > > > 16));
> > > > > > > > > - }
> > > > > > > > > - } else
> > > > > > > > > - pm = spibrg / (max_hz * 2);
> > > > > > > > > - if (pm)
> > > > > > > > > - pm--;
> > > > > > > > > - fsl->pm = pm;
> > > > > > > > > -
> > > > > > > > > - if (fsl->div16)
> > > > > > > > > - spi_freq = spibrg / ((pm + 1) * 2 * 16);
> > > > > > > > > - else
> > > > > > > > > - spi_freq = spibrg / ((pm + 1) * 2);
> > > > > > > > > -
> > > > > > > > > - /* set tx_timeout to 10 times of one espi FIFO entry
> > > > > > > > > go
> out
> > > > */
> > > > > > > > > - fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND *
> > > > > > > > ESPI_FIFO_WIDTH_BIT
> > > > > > > > > - * 10), spi_freq);
> > > > > > > > > -
> > > > > > > > > - return &fsl->slave;
> > > > > > > > > -}
> > > > > > > > > -
> > > > > > > > > -void spi_free_slave(struct spi_slave *slave)
> > > > > > > > > +#ifndef CONFIG_DM_SPI
> > > > > > > >
> > > > > > > > Would you try for full dm-conversion? it would be hard to
> > > > > > > > move all respective defconfigs to use but better try since
> > > > > > > > we have next version deadline for full dm-conversion. thanks!
> > > > > > > Currently my espi driver is modified to be compatible with
> > > > > > > dm configuration and non-dm configuration.
> > > > > > > If uboot don't need non-dm code in the future, I will remove
> > > > > > > this compatibility and only keep the dm driver code. Thank you.
> > > > > >
> > > > > > Idea is to make fully dm supported and ie what we have
> > > > > > migration deadline, doc/driver-model/MIGRATION.txt
> > > > > Do you mean that I need to delete the original non-dm code?
> > > > > Or there are some values in the dm code that do not come from dts!
> > > > > Can you tell me something about it? Thank you!
> > > >
> > > > If not dt, can be done via platdata, we have few drivers with
> > > > similar support drivers/spi/pl022_spi.c
> > > >
> >
> > I am trying to break dead-lock here.
> >
> > Request from Jagan i.e. convert this driver in full DM model. Remove
> non-dm compatibility.
> > Considering most of the NXP's PowerPC platforms are not supported device
> tree.
> > A middle path will be platdata similar to drivers/spi/pl022_spi.c.
>
> platdata is straightforward, we have a driver that supported. only concern I
> can
> see here, the boards which are using this driver would have dm, of_control or
> platdata if they want to use fully converted fsl_espi.c
Ok, I will do a full dm conversion in June.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot