> Subject: [PATCH v1 05/11] ARM: display5: Increase the pre-relocation malloc > pool size to 4KiB > > Porting more DTS code from Linux kernel for display5 board required increase > of pre-relocation malloc pool size in U-Boot proper. > > The early malloc memory is necessary for handling parsing and setup of e.g. > serial port device (and all its ancestors in DT tree). > > Signed-off-by: Lukasz Majewski <lu...@denx.de> > --- > > configs/display5_defconfig | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/configs/display5_defconfig b/configs/display5_defconfig index > 3b793f4500..0ef56024e9 100644 > --- a/configs/display5_defconfig > +++ b/configs/display5_defconfig > @@ -4,16 +4,19 @@ CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > +CONFIG_SYS_MALLOC_F_LEN=0x1000 > CONFIG_MX6_DDRCAL=y > CONFIG_TARGET_DISPLAY5=y > CONFIG_SPL_MMC_SUPPORT=y > CONFIG_SPL_SERIAL_SUPPORT=y > +CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 > CONFIG_NR_DRAM_BANKS=1 > CONFIG_SPL=y > CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y > CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068 > CONFIG_SPL_SPI_FLASH_SUPPORT=y > CONFIG_SPL_SPI_SUPPORT=y > +CONFIG_TPL_SYS_MALLOC_F_LEN=0x400
Acked-by: Peng Fan <peng....@nxp.com> Just a question, TPL is enabled for this platform? > CONFIG_FIT=y > CONFIG_SPL_LOAD_FIT=y > CONFIG_OF_BOARD_SETUP=y > -- > 2.11.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot