On 16/07/2019 15:37, and...@gherzan.ro wrote: > From: Andrei Gherzan <and...@balena.io> > > This PR consolidates the work we've done to support the new Raspberry Pi
I don't understand why you posted these while you asked me if I'll submit them. That's not a good way to collaborate on upstream. Please use get_maintainers.pl to see whom you have to send the patches to. > 4 board. It also includes commits from > https://github.com/mbgg/u-boot.git (credits to Matthias Brugger). > > Andrei Gherzan (13): > dts: Create a dtsi for BCM2835/6/7 specific configuration > dts: Add initial support for bcm2838 > arm: mach-bcm283x: Define configs for RaspberryPi 4 > arm: mach-bcm283x: Define mbox address for BCM2838 > rpi: Add rpi_model entry for RaspberryPi 4 > dt-bindings: Define BCM2838_CLOCK_EMMC2 needed for RaspberryPi 4 > arm: bcm283x: Include definition for additional emmc clock > arm: bcm283x: Define device base addresses for bcm2835 > config: rpi4: Add defconfig for rpi4-32 > dts: bcm2838-rpi-4-b: Use the emmc2 interface for sdhci > rpi: Add memory map for bcm2838 > configs: rpi4: Remove DWC2 and USB_ETHER configs > dts: bcm2838-rpi-4-b: Use the emmc2/2811 compatible string for SDHCI > > Fabian Vogt (2): > bcm2835 video: Bail out early if querying video information fails > bcm283x mbox: Correctly wait for space to send Both not needed with FW at 025759b86 ("firmware: Rename hdmi_enable_4k to hdmi_enable_4kp60") Apart from that they have already been posted. > > Matthias Brugger (1): > mmc: bcm2835_sdhci: Add support for bcm2711 device > > arch/arm/dts/Makefile | 4 +- > arch/arm/dts/bcm2835-common.dtsi | 53 +++++ > arch/arm/dts/bcm2835.dtsi | 1 + > arch/arm/dts/bcm2836.dtsi | 1 + > arch/arm/dts/bcm2837.dtsi | 1 + > arch/arm/dts/bcm2838-rpi-4-b.dts | 52 +++++ > arch/arm/dts/bcm2838.dtsi | 237 +++++++++++++++++++++ > arch/arm/dts/bcm283x.dtsi | 45 +--- > arch/arm/mach-bcm283x/Kconfig | 35 +++ > arch/arm/mach-bcm283x/include/mach/mbox.h | 13 +- > arch/arm/mach-bcm283x/include/mach/sdhci.h | 4 + > arch/arm/mach-bcm283x/include/mach/timer.h | 4 + > arch/arm/mach-bcm283x/include/mach/wdog.h | 4 + > arch/arm/mach-bcm283x/mbox.c | 6 +- > board/raspberrypi/rpi/rpi.c | 32 ++- > configs/rpi_4_32b_defconfig | 40 ++++ > configs/rpi_4_defconfig | 3 - > drivers/mmc/bcm2835_sdhci.c | 12 +- > drivers/video/bcm2835.c | 4 +- > include/dt-bindings/clock/bcm2835.h | 2 + > 20 files changed, 494 insertions(+), 59 deletions(-) > create mode 100644 arch/arm/dts/bcm2835-common.dtsi > create mode 100644 arch/arm/dts/bcm2838-rpi-4-b.dts > create mode 100644 arch/arm/dts/bcm2838.dtsi > create mode 100644 configs/rpi_4_32b_defconfig > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot