On 6/11/2010 11:44 AM, vipink wrote: > Dear Tom, Wolfgang, > > Can you please let me know the status of the remainging patches of this > patch-set. > I have not received any reply after sending v3 patch a long time back >
Dear Tom, Wolfgang A gentle reminder Regards Vipin > These are the Acks I have already received > > SPEAr : Configuring FSMC driver for NAND interface > http://www.mail-archive.com/u-boot@lists.denx.de/msg31656.html > SPEAr : FSMC driver support added > http://www.mail-archive.com/u-boot@lists.denx.de/msg31655.html > SPEAr : i2c driver moved completely into drivers/i2c > http://www.mail-archive.com/u-boot@lists.denx.de/msg31604.html > SPEAr : USB Device Controller driver support added > http://www.mail-archive.com/u-boot@lists.denx.de/msg32362.html > SPEAr : macb driver support added for spear310 and spear320 > http://www.mail-archive.com/u-boot@lists.denx.de/msg33153.html > SPEAr : Network support configured for spear SoCs > http://www.mail-archive.com/u-boot@lists.denx.de/msg33152.html > > Thanks in advance > > Regards > Vipin > > On 5/28/2010 10:22 PM, Vipin Kumar wrote: >> Dear Wolfgang, >> >> This patch-set as been pending for a long time and it seems Tom is also away >> from mails. A few patches have already been Acked by respective device owners >> >> Please let me know how do I get this patch-set included in 2006.06 release >> >> Thanks in advance >> Vipin >> >> On Fri, May 14, 2010 at 8:26 AM, Vipin KUMAR <vipin.ku...@st.com> wrote: >>> Dear Tom, >>> >>> I am still waiting for Ack/feedback if any on this patchset v3 >>> All feedbacks provided by you on patchset v2 have been incorporated >>> >>> Regards >>> Vipin >>> >>> On 5/9/2010 7:46 PM, Vipin Kumar wrote: >>>> Hello Tom, >>>> >>>> Please consider this patch-set for mainline submission. >>>> Please let me know if there are any changes to be made >>>> in code or if the patches are good to go into mainline >>>> >>>> Thanks & Regards >>>> Vipin >>>> >>>> On Thu, May 6, 2010 at 4:48 PM, Vipin KUMAR <vipin.ku...@st.com> wrote: >>>>> Hello Tom, >>>>> The following patch-set contains all the accepted feedbacks on >>>>> patch-set v2. >>>>> Please consider this for submission into mainline >>>>> >>>>> Below changes are introduced other than the recieved review comments >>>>> 1. Introduced a CONFIG_DW_SEARCH_PHY definition, which if defined >>>>> searches >>>>> the ethernet phy address. Searching was always enabled in earlier patch >>>>> 2. Introduced a new function dw_write_hwaddr in ethernet driver and >>>>> registered it as a callback via dev->write_hwaddr. This is a new feature >>>>> recently implemented by Ben. >>>>> >>>>> Thanks in advance >>>>> >>>>> Regards >>>>> Vipin >>>>> >>>>> Vipin Kumar (19): >>>>> u-boot.img file not created when srctree and objtree are different >>>>> change_bit routine defined >>>>> SPEAr : SMI erase and write timeouts increased >>>>> SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET >>>>> SPEAr : Reducing the max RAM size to 128MB >>>>> SPEAr : Basic arch related support added for SPEAr SoCs >>>>> SPEAr : Network driver support added >>>>> SPEAr : Network support configured for spear SoCs >>>>> SPEAr : macb driver support added for spear310 and spear320 >>>>> SPEAr : FSMC driver support added >>>>> SPEAr : Configuring FSMC driver for NAND interface >>>>> SPEAr : i2c driver moved completely into drivers/i2c >>>>> SPEAr : smi driver moved completely into drivers/mtd >>>>> SPEAr : USB Device Controller driver support added >>>>> SPEAr : Supporting various configurations for spear3xx and spear6xx >>>>> boards >>>>> SPEAr : Basic spear1300 architecture support added >>>>> SPEAr : spear1300 SoC support added >>>>> SPEAr : Removing extraneous code >>>>> SPEAr : USB device controller bugfixes >>>>> >>>>> MAINTAINERS | 1 + >>>>> MAKEALL | 1 + >>>>> Makefile | 30 +- >>>>> arch/arm/cpu/arm926ejs/spear/Makefile | 3 +- >>>>> arch/arm/cpu/arm926ejs/spear/cpu.c | 78 +++ >>>>> arch/arm/cpu/arm_cortexa8/spear13xx/Makefile | 52 ++ >>>>> arch/arm/cpu/arm_cortexa8/spear13xx/cache.S | 114 +++++ >>>>> arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c | 96 ++++ >>>>> .../arm_cortexa8/spear13xx/reset.c} | 52 +-- >>>>> arch/arm/cpu/arm_cortexa8/spear13xx/timer.c | 138 +++++ >>>>> .../arm/include/asm/arch-spear/clk.h | 26 +- >>>>> arch/arm/include/asm/arch-spear/hardware.h | 16 +- >>>>> arch/arm/include/asm/arch-spear/spr_misc.h | 5 + >>>>> .../arm/include/asm/arch-spear13xx/hardware.h | 33 +- >>>>> arch/arm/include/asm/arch-spear13xx/spr_gpt.h | 85 ++++ >>>>> arch/arm/include/asm/arch-spear13xx/spr_misc.h | 317 ++++++++++++ >>>>> .../arm/include/asm/arch-spear13xx/sys_proto.h | 29 +- >>>>> arch/arm/include/asm/bitops.h | 11 +- >>>>> board/spear/common/Makefile | 10 +- >>>>> board/spear/common/spr_misc.c | 28 +- >>>>> board/spear/spear1300/Makefile | 51 ++ >>>>> board/spear/spear1300/config.mk | 28 + >>>>> board/spear/spear1300/spear1300.c | 88 ++++ >>>>> .../spear/spear1300/spr_lowlevel_init.S | 35 +- >>>>> board/spear/spear300/config.mk | 11 - >>>>> board/spear/spear300/spear300.c | 15 +- >>>>> board/spear/spear310/config.mk | 11 - >>>>> board/spear/spear310/spear310.c | 36 ++- >>>>> board/spear/spear320/config.mk | 11 - >>>>> board/spear/spear320/spear320.c | 23 +- >>>>> board/spear/spear600/config.mk | 11 - >>>>> board/spear/spear600/spear600.c | 15 +- >>>>> doc/README.designware_eth | 25 + >>>>> doc/README.spear | 46 ++- >>>>> drivers/i2c/Makefile | 2 +- >>>>> drivers/i2c/{spr_i2c.c => designware_i2c.c} | 4 +- >>>>> .../spr_i2c.h => drivers/i2c/designware_i2c.h | 6 +- >>>>> drivers/mtd/Makefile | 2 +- >>>>> drivers/mtd/nand/Makefile | 2 +- >>>>> drivers/mtd/nand/fsmc_nand.c | 366 ++++++++++++++ >>>>> drivers/mtd/nand/spr_nand.c | 124 ----- >>>>> drivers/mtd/{spr_smi.c => st_smi.c} | 59 ++- >>>>> .../arch-spear/spr_smi.h => drivers/mtd/st_smi.h | 8 +- >>>>> drivers/net/Makefile | 1 + >>>>> drivers/net/designware.c | 531 >>>>> ++++++++++++++++++++ >>>>> drivers/net/designware.h | 264 ++++++++++ >>>>> drivers/serial/usbtty.h | 4 +- >>>>> drivers/usb/gadget/Makefile | 2 +- >>>>> drivers/usb/gadget/{spr_udc.c => designware_udc.c} | 116 +++-- >>>>> include/configs/spear-common.h | 33 +- >>>>> include/configs/spear13xx_evb.h | 202 ++++++++ >>>>> include/configs/{spear3xx.h => spear3xx_evb.h} | 30 ++ >>>>> include/configs/{spear6xx.h => spear6xx_evb.h} | 13 + >>>>> include/linux/mtd/fsmc_nand.h | 104 ++++ >>>>> include/netdev.h | 1 + >>>>> include/usb/{spr_udc.h => designware_udc.h} | 6 +- >>>>> 56 files changed, 2993 insertions(+), 418 deletions(-) >>>>> create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c >>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/Makefile >>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cache.S >>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c >>>>> rename arch/arm/{include/asm/arch-spear/spr_nand.h => >>>>> cpu/arm_cortexa8/spear13xx/reset.c} (50%) >>>>> mode change 100644 => 100755 >>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/timer.c >>>>> copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear/clk.h >>>>> (64%) >>>>> copy include/configs/spear6xx.h => >>>>> arch/arm/include/asm/arch-spear13xx/hardware.h (58%) >>>>> create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_gpt.h >>>>> create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_misc.h >>>>> copy include/configs/spear6xx.h => >>>>> arch/arm/include/asm/arch-spear13xx/sys_proto.h (64%) >>>>> create mode 100644 board/spear/spear1300/Makefile >>>>> create mode 100644 board/spear/spear1300/config.mk >>>>> create mode 100644 board/spear/spear1300/spear1300.c >>>>> copy include/configs/spear6xx.h => >>>>> board/spear/spear1300/spr_lowlevel_init.S (56%) >>>>> create mode 100644 doc/README.designware_eth >>>>> rename drivers/i2c/{spr_i2c.c => designware_i2c.c} (98%) >>>>> rename arch/arm/include/asm/arch-spear/spr_i2c.h => >>>>> drivers/i2c/designware_i2c.h (98%) >>>>> create mode 100644 drivers/mtd/nand/fsmc_nand.c >>>>> delete mode 100644 drivers/mtd/nand/spr_nand.c >>>>> rename drivers/mtd/{spr_smi.c => st_smi.c} (94%) >>>>> rename arch/arm/include/asm/arch-spear/spr_smi.h => drivers/mtd/st_smi.h >>>>> (96%) >>>>> create mode 100644 drivers/net/designware.c >>>>> create mode 100644 drivers/net/designware.h >>>>> rename drivers/usb/gadget/{spr_udc.c => designware_udc.c} (91%) >>>>> create mode 100644 include/configs/spear13xx_evb.h >>>>> rename include/configs/{spear3xx.h => spear3xx_evb.h} (85%) >>>>> rename include/configs/{spear6xx.h => spear6xx_evb.h} (82%) >>>>> create mode 100644 include/linux/mtd/fsmc_nand.h >>>>> rename include/usb/{spr_udc.h => designware_udc.h} (98%) >>>>> >>>>> _______________________________________________ >>>>> U-Boot mailing list >>>>> U-Boot@lists.denx.de >>>>> http://lists.denx.de/mailman/listinfo/u-boot >>>>> >>>> >>> >>> >> > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot