On 11.09.2019 16:13, Stefan Roese wrote:
> > Hi Eugen, > > On 27.08.19 09:54, eugen.hris...@microchip.com wrote: >> >> >> On 27.08.2019 09:14, Stefan Roese wrote: >> >>> >>> This patch enables the BBT in NAND on the AT91SAM based GARDENA smart >>> Gateway. This is especially important, since the Linux driver also >>> enables this option and uses the BBT table pages. Without setting this >>> option, U-Boot will try to re-use these pages again (e.g. UBI). >>> >>> Signed-off-by: Stefan Roese <s...@denx.de> >>> Cc: Eugen Hristev <eugen.hris...@microchip.com> >>> Cc: Tom Rini <tr...@konsulko.com> >>> --- >>> Eugen, I would advise you to double-check, if your AT91 based boards >>> using NAND also have this BBT option enabled in Linux. If yes, its >>> definitely necessary to enable it in U-Boot as well to match the same >>> layout. >> >> Hi Stefan, >> >> Thank you for the patch. >> I will look into it with help of Tudor and provide some feedback. > > Do you have any updates on this? > > Would it be possible to apply this patch for the upcoming release? > > Thanks, > Stefan > Applied to u-boot-atmel/master Will queue it before release in a PR. Have to check if more at91 boards need the same kind of patch. Eugen _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
