Hi Eugen,
On 12.09.19 08:07, eugen.hris...@microchip.com wrote:
This patch enables the BBT in NAND on the AT91SAM based GARDENA smart
Gateway. This is especially important, since the Linux driver also
enables this option and uses the BBT table pages. Without setting this
option, U-Boot will try to re-use these pages again (e.g. UBI).
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Eugen Hristev <eugen.hris...@microchip.com>
Cc: Tom Rini <tr...@konsulko.com>
---
Eugen, I would advise you to double-check, if your AT91 based boards
using NAND also have this BBT option enabled in Linux. If yes, its
definitely necessary to enable it in U-Boot as well to match the same
layout.
Hi Stefan,
Thank you for the patch.
I will look into it with help of Tudor and provide some feedback.
Do you have any updates on this?
Would it be possible to apply this patch for the upcoming release?
Thanks,
Stefan
Applied to u-boot-atmel/master
Thanks.
Will queue it before release in a PR. Have to check if more at91 boards
need the same kind of patch.
As mentioned before, I'm pretty sure that most (all) at91 boards with
NAND need this patch.
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
