Hello! There is no uart output and no video with u-boot master. The board works as expected booting the Asus Armbian image on an SD.
At this point i'd be happy to get some u-boot uart output :-) -- Alex September 22, 2019 8:04 PM, "Kever Yang" <kever.y...@rock-chips.com> wrote: > Hi Alexander, > > The tinker board already enable TPL, so it should be use TPL instead of SPL > with mkimage tool. > > The idbloader should have including both, if the idbloader boot fail, could > you share the boot log? > > Thanks, > - Kever > On 2019/9/23 上午5:22, Alexander von Gluck IV wrote: > >> Using master from git://git.denx.de/u-boot.git >> >> commit 390183b58179ddaf986422f4d9446c596660f7e0 (HEAD -> master, >> origin/master, origin/HEAD) >> Merge: d6c7309f56 79907a4f84 >> Author: Tom Rini <tr...@konsulko.com> >> Date: Sat Sep 21 07:31:23 2019 -0400 >> >> Merge tag 'efi-2019-10-rc4-5' of >> https://gitlab.denx.de/u-boot/custodians/u-boot-efi >>> Pull request for UEFI sub-system for v2019.10-rc4 (5) >>> This patch set fixes errors in the UEFI sub-system and adds a function to >> compare u16 strings which is prerequisite for further patches. >> >> Same error: >> >> $ ./tools/mkimage -n rk3288 -T rksd -d spl/u-boot-spl-dtb.bin out >> Warning: SPL image is too large (size 0xb000) and will not boot >> Error: image verification failed >> >> $ ls -lah spl/u-boot-spl-dtb.bin >> -rw-rw-r-- 1 kallisti5 kallisti5 43K Sep 22 16:17 spl/u-boot-spl-dtb.bin >> >> September 22, 2019 4:03 PM, "Michael Nazzareno Trimarchi" >> <mich...@amarulasolutions.com> wrote: >> >>> Hi >>> >>> Please use the latest uboot. The fixes should be already merged >>> >>> Mcihael >>> >>> On Sun, Sep 22, 2019 at 10:53 PM Alexander von Gluck IV >>> <kallis...@unixzen.com> wrote: >> >> Anyone know a way to get a functional u-boot on the rk3288? (Tinkerboard, SD) >> >> The docs seem to recommend: >> $ /tmp/arm-build/tools/mkimage -n rk3288 -T rksd -d >> arm/tinkerboard/u-boot-spl-dtb.bin out >> >> However, that produces: >> Warning: SPL image is too large (size 0xb000) and will not boot >> >> I saw this patch to disable I2C in the SPL to reduce its size: >> https://github.com/xypron/u-boot-patches/blob/df2ceb65fb4cc433aa17304ed9d3d591c14ef5ac/0001-configs- >> inker-rk3288-disable-CONFIG_SPL_I2C_SUPPORT.patch >> >> However, that breaks the build :-| >> >> LD spl/u-boot-spl >> arm-unknown-haiku-ld.bfd: drivers/built-in.o: in function `rk8xx_write': >> /tmp/arm-build/drivers/power/pmic/rk8xx.c:30: undefined reference to >> `dm_i2c_write' >> arm-unknown-haiku-ld.bfd: drivers/built-in.o: in function `rk8xx_read': >> /tmp/arm-build/drivers/power/pmic/rk8xx.c:43: undefined reference to >> `dm_i2c_read' >> make[1]: *** [scripts/Makefile.spl:404: spl/u-boot-spl] Error 1 >> make: *** [Makefile:1762: spl/u-boot-spl] Error 2 >> make: Leaving directory '/tmp/arm-build' >> Disabling SPL Power then results in an error compiling MMC support >> Any alternative methods to getting u-boot running from SD? >> Rockchip devices seem to be kind of complex to get going :-| >> -- Alex >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> https://lists.denx.de/listinfo/u-boot >>> -- >>> | Michael Nazzareno Trimarchi Amarula Solutions BV | >>> | COO - Founder Cruquiuskade 47 | >>> | +31(0)851119172 Amsterdam 1018 AM NL | >>> | [`as] http://www.amarulasolutions.com | >> >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot