On 08.11.19 04:22, Kever Yang wrote: > > On 2019/11/7 下午7:11, Soeren Moch wrote: >> The most important change for u-boot is the fix for the vdd-log pwm >> voltage regulator to avoid overvoltage for the VD_LOGIC power domain. >> >> Signed-off-by: Soeren Moch <sm...@web.de> >> =2D-- >> Cc: Kever Yang <kever.y...@rock-chips.com> >> Cc: u-boot@lists.denx.de >> =2D-- > > Why is the "=2D- -" here? 'git send-email' encodes the patch this way. I use git version 2.17.1 . Apparently this this done to avoid problems with MTAs, I also saw 'From' in a patch description encoded in this special way. Seems to be no problem for other tools, e.g. u-boot patchwork converts this back to the more traditional readable form.
I'm not sure what I should do about this, seems to be more a feature than a bug. > > Otherwise looks good to me. > > > Reviewed-by: Kever Yang<kever.y...@rock-chips.com> Thanks, Soeren > > Thanks, > - Kever > >> arch/arm/dts/rk3399-rockpro64.dts | 57 ++++++++++++++++++++++++++----- >> 1 file changed, 49 insertions(+), 8 deletions(-) >> >> diff --git a/arch/arm/dts/rk3399-rockpro64.dts >> b/arch/arm/dts/rk3399-rockp= >> ro64.dts >> index 1f2394e058..e544deb61d 100644 >> =2D-- a/arch/arm/dts/rk3399-rockpro64.dts >> +++ b/arch/arm/dts/rk3399-rockpro64.dts >> @@ -58,6 +58,13 @@ >> }; >> }; >> >> + fan: pwm-fan { >> + compatible =3D "pwm-fan"; >> + #cooling-cells =3D <2>; >> + fan-supply =3D <&vcc12v_dcin>; >> + pwms =3D <&pwm1 0 50000 0>; >> + }; >> + >> sdio_pwrseq: sdio-pwrseq { >> compatible =3D "mmc-pwrseq-simple"; >> clocks =3D <&rk808 1>; >> @@ -166,7 +173,7 @@ >> regulator-always-on; >> regulator-boot-on; >> regulator-min-microvolt =3D <800000>; >> - regulator-max-microvolt =3D <1400000>; >> + regulator-max-microvolt =3D <1700000>; >> vin-supply =3D <&vcc5v0_sys>; >> }; >> }; >> @@ -222,6 +229,10 @@ >> status =3D "okay"; >> }; >> >> +&hdmi_sound { >> + status =3D "okay"; >> +}; >> + >> &gpu { >> mali-supply =3D <&vdd_gpu>; >> status =3D "okay"; >> @@ -236,8 +247,8 @@ >> rk808: pmic@1b { >> compatible =3D "rockchip,rk808"; >> reg =3D <0x1b>; >> - interrupt-parent =3D <&gpio1>; >> - interrupts =3D <21 IRQ_TYPE_LEVEL_LOW>; >> + interrupt-parent =3D <&gpio3>; >> + interrupts =3D <10 IRQ_TYPE_LEVEL_LOW>; >> #clock-cells =3D <1>; >> clock-output-names =3D "xin32k", "rk808-clkout2"; >> pinctrl-names =3D "default"; >> @@ -504,11 +515,25 @@ >> status =3D "okay"; >> >> bt656-supply =3D <&vcc1v8_dvp>; >> - audio-supply =3D <&vcca1v8_codec>; >> + audio-supply =3D <&vcc_3v0>; >> sdmmc-supply =3D <&vcc_sdio>; >> gpio1830-supply =3D <&vcc_3v0>; >> }; >> >> +&pcie0 { >> + ep-gpios =3D <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; >> + num-lanes =3D <4>; >> + pinctrl-names =3D "default"; >> + pinctrl-0 =3D <&pcie_perst>; >> + vpcie12v-supply =3D <&vcc12v_dcin>; >> + vpcie3v3-supply =3D <&vcc3v3_pcie>; >> + status =3D "okay"; >> +}; >> + >> +&pcie_phy { >> + status =3D "okay"; >> +}; >> + >> &pmu_io_domains { >> pmu1830-supply =3D <&vcc_3v0>; >> status =3D "okay"; >> @@ -538,6 +563,10 @@ >> }; >> >> pcie { >> + pcie_perst: pcie-perst { >> + rockchip,pins =3D <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + >> pcie_pwr_en: pcie-pwr-en { >> rockchip,pins =3D <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; >> }; >> @@ -545,7 +574,7 @@ >> >> pmic { >> pmic_int_l: pmic-int-l { >> - rockchip,pins =3D <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; >> + rockchip,pins =3D <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; >> }; >> >> vsel1_gpio: vsel1-gpio { >> @@ -580,6 +609,10 @@ >> status =3D "okay"; >> }; >> >> +&pwm1 { >> + status =3D "okay"; >> +}; >> + >> &pwm2 { >> status =3D "okay"; >> }; >> @@ -591,7 +624,6 @@ >> >> &sdmmc { >> bus-width =3D <4>; >> - cap-mmc-highspeed; >> cap-sd-highspeed; >> cd-gpios =3D <&gpio0 7 GPIO_ACTIVE_LOW>; >> disable-wp; >> @@ -603,12 +635,21 @@ >> >> &sdhci { >> bus-width =3D <8>; >> - mmc-hs400-1_8v; >> - mmc-hs400-enhanced-strobe; >> + mmc-hs200-1_8v; >> non-removable; >> status =3D "okay"; >> }; >> >> +&spi1 { >> + status =3D "okay"; >> + >> + flash@0 { >> + compatible =3D "jedec,spi-nor"; >> + reg =3D <0>; >> + spi-max-frequency =3D <10000000>; >> + }; >> +}; >> + >> &tcphy0 { >> status =3D "okay"; >> }; >> =2D- >> 2.17.1 >> >> > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot