On 08.11.19 09:45, Soeren Moch wrote: > On 08.11.19 04:22, Kever Yang wrote: >> On 2019/11/7 下午7:11, Soeren Moch wrote: >>> The most important change for u-boot is the fix for the vdd-log pwm >>> voltage regulator to avoid overvoltage for the VD_LOGIC power domain. >>> >>> Signed-off-by: Soeren Moch <sm...@web.de> >>> =2D-- >>> Cc: Kever Yang <kever.y...@rock-chips.com> >>> Cc: u-boot@lists.denx.de >>> =2D-- >> Why is the "=2D- -" here? > 'git send-email' encodes the patch this way. I use git version 2.17.1 . > Apparently this this done to avoid problems with MTAs, I also saw 'From' > in a patch description encoded in this special way. > Seems to be no problem for other tools, e.g. u-boot patchwork converts > this back to the more traditional readable form. > > I'm not sure what I should do about this, seems to be more a feature > than a bug. Apparently 'git send-email' changed the default transfer encoding from unspecified 8bit to quoted-printable. Do you want me to resend these patches with simpler transfer encoding, e.g. 7bit?
Thanks, Soeren >> Otherwise looks good to me. >> >> >> Reviewed-by: Kever Yang<kever.y...@rock-chips.com> > Thanks, > Soeren >> Thanks, >> - Kever >> >>> arch/arm/dts/rk3399-rockpro64.dts | 57 ++++++++++++++++++++++++++----- >>> 1 file changed, 49 insertions(+), 8 deletions(-) >>> >>> diff --git a/arch/arm/dts/rk3399-rockpro64.dts >>> b/arch/arm/dts/rk3399-rockp= >>> ro64.dts >>> index 1f2394e058..e544deb61d 100644 >>> =2D-- a/arch/arm/dts/rk3399-rockpro64.dts >>> +++ b/arch/arm/dts/rk3399-rockpro64.dts >>> @@ -58,6 +58,13 @@ >>> }; >>> }; >>> >>> + fan: pwm-fan { >>> + compatible =3D "pwm-fan"; >>> + #cooling-cells =3D <2>; >>> + fan-supply =3D <&vcc12v_dcin>; >>> + pwms =3D <&pwm1 0 50000 0>; >>> + }; >>> + >>> sdio_pwrseq: sdio-pwrseq { >>> compatible =3D "mmc-pwrseq-simple"; >>> clocks =3D <&rk808 1>; >>> @@ -166,7 +173,7 @@ >>> regulator-always-on; >>> regulator-boot-on; >>> regulator-min-microvolt =3D <800000>; >>> - regulator-max-microvolt =3D <1400000>; >>> + regulator-max-microvolt =3D <1700000>; >>> vin-supply =3D <&vcc5v0_sys>; >>> }; >>> }; >>> @@ -222,6 +229,10 @@ >>> status =3D "okay"; >>> }; >>> >>> +&hdmi_sound { >>> + status =3D "okay"; >>> +}; >>> + >>> &gpu { >>> mali-supply =3D <&vdd_gpu>; >>> status =3D "okay"; >>> @@ -236,8 +247,8 @@ >>> rk808: pmic@1b { >>> compatible =3D "rockchip,rk808"; >>> reg =3D <0x1b>; >>> - interrupt-parent =3D <&gpio1>; >>> - interrupts =3D <21 IRQ_TYPE_LEVEL_LOW>; >>> + interrupt-parent =3D <&gpio3>; >>> + interrupts =3D <10 IRQ_TYPE_LEVEL_LOW>; >>> #clock-cells =3D <1>; >>> clock-output-names =3D "xin32k", "rk808-clkout2"; >>> pinctrl-names =3D "default"; >>> @@ -504,11 +515,25 @@ >>> status =3D "okay"; >>> >>> bt656-supply =3D <&vcc1v8_dvp>; >>> - audio-supply =3D <&vcca1v8_codec>; >>> + audio-supply =3D <&vcc_3v0>; >>> sdmmc-supply =3D <&vcc_sdio>; >>> gpio1830-supply =3D <&vcc_3v0>; >>> }; >>> >>> +&pcie0 { >>> + ep-gpios =3D <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; >>> + num-lanes =3D <4>; >>> + pinctrl-names =3D "default"; >>> + pinctrl-0 =3D <&pcie_perst>; >>> + vpcie12v-supply =3D <&vcc12v_dcin>; >>> + vpcie3v3-supply =3D <&vcc3v3_pcie>; >>> + status =3D "okay"; >>> +}; >>> + >>> +&pcie_phy { >>> + status =3D "okay"; >>> +}; >>> + >>> &pmu_io_domains { >>> pmu1830-supply =3D <&vcc_3v0>; >>> status =3D "okay"; >>> @@ -538,6 +563,10 @@ >>> }; >>> >>> pcie { >>> + pcie_perst: pcie-perst { >>> + rockchip,pins =3D <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; >>> + }; >>> + >>> pcie_pwr_en: pcie-pwr-en { >>> rockchip,pins =3D <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; >>> }; >>> @@ -545,7 +574,7 @@ >>> >>> pmic { >>> pmic_int_l: pmic-int-l { >>> - rockchip,pins =3D <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; >>> + rockchip,pins =3D <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; >>> }; >>> >>> vsel1_gpio: vsel1-gpio { >>> @@ -580,6 +609,10 @@ >>> status =3D "okay"; >>> }; >>> >>> +&pwm1 { >>> + status =3D "okay"; >>> +}; >>> + >>> &pwm2 { >>> status =3D "okay"; >>> }; >>> @@ -591,7 +624,6 @@ >>> >>> &sdmmc { >>> bus-width =3D <4>; >>> - cap-mmc-highspeed; >>> cap-sd-highspeed; >>> cd-gpios =3D <&gpio0 7 GPIO_ACTIVE_LOW>; >>> disable-wp; >>> @@ -603,12 +635,21 @@ >>> >>> &sdhci { >>> bus-width =3D <8>; >>> - mmc-hs400-1_8v; >>> - mmc-hs400-enhanced-strobe; >>> + mmc-hs200-1_8v; >>> non-removable; >>> status =3D "okay"; >>> }; >>> >>> +&spi1 { >>> + status =3D "okay"; >>> + >>> + flash@0 { >>> + compatible =3D "jedec,spi-nor"; >>> + reg =3D <0>; >>> + spi-max-frequency =3D <10000000>; >>> + }; >>> +}; >>> + >>> &tcphy0 { >>> status =3D "okay"; >>> }; >>> =2D- >>> 2.17.1 >>> >>> >> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot