On Mon, 9 Dec 2019 11:53:05 +0100 Giulio Benetti <giulio.bene...@benettiengineering.com> wrote:
> Forgotten to ask you...
>
> On 12/9/19 11:49 AM, Giulio Benetti wrote:
> > Hi Lukasz,
> >
> > On 12/8/19 3:40 PM, Lukasz Majewski wrote:
> >> On Wed, 4 Dec 2019 18:44:30 +0100
> >> Giulio Benetti <giulio.bene...@benettiengineering.com> wrote:
> >>
> >>> Add i.MXRT1050 clk driver support.
> >>>
> >>> Signed-off-by: Giulio Benetti
> >>> <giulio.bene...@benettiengineering.com> ---
> >>> drivers/clk/imx/Kconfig | 16 ++
> >>> drivers/clk/imx/Makefile | 2 +
> >>> drivers/clk/imx/clk-imxrt1050.c | 292
> >>> ++++++++++++++++++++ include/dt-bindings/clock/imxrt1050-clock.h |
> >>> 65 +++++ 4 files changed, 375 insertions(+)
> >>> create mode 100644 drivers/clk/imx/clk-imxrt1050.c
> >>> create mode 100644 include/dt-bindings/clock/imxrt1050-clock.h
> >>>
> >>> diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
> >>> index 0ba8bc9f63..d5738b5211 100644
> >>> --- a/drivers/clk/imx/Kconfig
> >>> +++ b/drivers/clk/imx/Kconfig
> >>> @@ -52,3 +52,19 @@ config CLK_IMX8MN
> >>> select CLK_CCF
> >>> help
> >>> This enables support clock driver for i.MX8MN
> >>> platforms. +
> >>> +config SPL_CLK_IMXRT1050
> >>> + bool "SPL clock support for i.MXRT1050"
> >>> + depends on ARCH_IMXRT && SPL
> >>> + select SPL_CLK
> >>> + select SPL_CLK_CCF
> >>> + help
> >>> + This enables SPL DM/DTS support for clock driver in
> >>> i.MXRT1050 +
> >>> +config CLK_IMXRT1050
> >>> + bool "Clock support for i.MXRT1050"
> >>> + depends on ARCH_IMXRT
> >>> + select CLK
> >>> + select CLK_CCF
> >>> + help
> >>> + This enables support clock driver for i.MXRT1050
> >>> platforms. diff --git a/drivers/clk/imx/Makefile
> >>> b/drivers/clk/imx/Makefile index 222c5a4e08..166cb7bb44 100644
> >>> --- a/drivers/clk/imx/Makefile
> >>> +++ b/drivers/clk/imx/Makefile
> >>> @@ -14,3 +14,5 @@ obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MM) +=
> >>> clk-imx8mm.o clk-pll14xx.o \ clk-composite-8m.o
> >>> obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MN) += clk-imx8mn.o
> >>> clk-pll14xx.o \ clk-composite-8m.o
> >>> +
> >>> +obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1050) += clk-imxrt1050.o
> >>> diff --git a/drivers/clk/imx/clk-imxrt1050.c
> >>> b/drivers/clk/imx/clk-imxrt1050.c new file mode 100644
> >>> index 0000000000..44ca52c013
> >>> --- /dev/null
> >>> +++ b/drivers/clk/imx/clk-imxrt1050.c
> >>> @@ -0,0 +1,292 @@
> >>> +// SPDX-License-Identifier: GPL-2.0+
> >>> +/*
> >>> + * Copyright(C) 2019
> >>> + * Author(s): Giulio Benetti
> >>> <giulio.bene...@benettiengineering.com>
> >>> + */
> >>> +
> >>> +#include <common.h>
> >>> +#include <clk.h>
> >>> +#include <clk-uclass.h>
> >>> +#include <dm.h>
> >>> +#include <asm/arch/clock.h>
> >>> +#include <asm/arch/imx-regs.h>
> >>> +#include <dt-bindings/clock/imxrt1050-clock.h>
> >>> +
> >>> +#include "clk.h"
> >>> +
> >>> +static ulong imxrt1050_clk_get_rate(struct clk *clk)
> >>> +{
> >>> + struct clk *c;
> >>> + int ret;
> >>> +
> >>> + debug("%s(#%lu)\n", __func__, clk->id);
> >>> +
> >>> + ret = clk_get_by_id(clk->id, &c);
> >>> + if (ret)
> >>> + return ret;
> >>> +
> >>> + return clk_get_rate(c);
> >>> +}
> >>> +
> >>> +static ulong imxrt1050_clk_set_rate(struct clk *clk, ulong rate)
> >>> +{
> >>> + struct clk *c;
> >>> + int ret;
> >>> +
> >>> + debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate);
> >>> +
> >>> + ret = clk_get_by_id(clk->id, &c);
> >>> + if (ret)
> >>> + return ret;
> >>> +
> >>> + return clk_set_rate(c, rate);
> >>> +}
> >>> +
> >>> +static int __imxrt1050_clk_enable(struct clk *clk, bool enable)
> >>> +{
> >>> + struct clk *c;
> >>> + int ret;
> >>> +
> >>> + debug("%s(#%lu) en: %d\n", __func__, clk->id, enable);
> >>> +
> >>> + ret = clk_get_by_id(clk->id, &c);
> >>> + if (ret)
> >>> + return ret;
> >>> +
> >>> + if (enable)
> >>> + ret = clk_enable(c);
> >>> + else
> >>> + ret = clk_disable(c);
> >>> +
> >>> + return ret;
> >>> +}
> >>> +
> >>> +static int imxrt1050_clk_disable(struct clk *clk)
> >>> +{
> >>> + return __imxrt1050_clk_enable(clk, 0);
> >>> +}
> >>> +
> >>> +static int imxrt1050_clk_enable(struct clk *clk)
> >>> +{
> >>> + return __imxrt1050_clk_enable(clk, 1);
> >>> +}
> >>> +
> >>> +static struct clk_ops imxrt1050_clk_ops = {
> >>> + .set_rate = imxrt1050_clk_set_rate,
> >>> + .get_rate = imxrt1050_clk_get_rate,
> >>> + .enable = imxrt1050_clk_enable,
> >>> + .disable = imxrt1050_clk_disable,
> >>> +};
> >>> +
> >>> +static const char * const pll_ref_sels[] = {"osc", "dummy", };
> >>> +static const char * const pll1_bypass_sels[] = {"pll1_arm",
> >>> "pll1_arm_ref_sel", }; +static const char * const
> >>> pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", }; +static
> >>> const char * const pll3_bypass_sels[] = {"pll3_usb_otg",
> >>> "pll3_usb_otg_ref_sel", }; +static const char * const
> >>> pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", }; +
> >>> +static const char *const pre_periph_sels[] = { "pll2_sys",
> >>> "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", }; +static const
> >>> char *const periph_sels[] = { "pre_periph_sel", "todo", };
> >>> +static const char *const usdhc_sels[] = { "pll2_pfd2_396m",
> >>> "pll2_pfd0_352m", }; +static const char *const lpuart_sels[] = {
> >>> "pll3_80m", "osc", }; +static const char *const semc_alt_sels[] =
> >>> { "pll2_pfd2_396m", "pll3_pfd1_664_62m", }; +static const char
> >>> *const semc_sels[] = { "periph_sel", "semc_alt_sel", }; +static
> >>> const char *const lcdif_sels[] = { "pll2_sys",
> >>> "pll3_pfd3_454_74m", "pll5_video:", "pll2_pfd0_352m",
> >>> "pll2_pfd1_594m", "pll3_pfd1_664_62m"}; + +static int
> >>> imxrt1050_clk_probe(struct udevice *dev) +{
> >>> + void *base;
> >>> +
> >>> + /* Anatop clocks */
> >>> + base = (void *)ANATOP_BASE_ADDR;
> >>> +
> >>> + clk_dm(IMXRT1050_CLK_PLL1_REF_SEL,
> >>> + imx_clk_mux("pll1_arm_ref_sel", base + 0x0, 14, 2,
> >>> + pll_ref_sels,
> >>> ARRAY_SIZE(pll_ref_sels)));
> >>> + clk_dm(IMXRT1050_CLK_PLL2_REF_SEL,
> >>> + imx_clk_mux("pll2_sys_ref_sel", base + 0x30, 14,
> >>> 2,
> >>> + pll_ref_sels,
> >>> ARRAY_SIZE(pll_ref_sels)));
> >>> + clk_dm(IMXRT1050_CLK_PLL3_REF_SEL,
> >>> + imx_clk_mux("pll3_usb_otg_ref_sel", base + 0x10,
> >>> 14, 2,
> >>> + pll_ref_sels,
> >>> ARRAY_SIZE(pll_ref_sels)));
> >>> + clk_dm(IMXRT1050_CLK_PLL5_REF_SEL,
> >>> + imx_clk_mux("pll5_video_ref_sel", base + 0xa0,
> >>> 14, 2,
> >>> + pll_ref_sels,
> >>> ARRAY_SIZE(pll_ref_sels))); +
> >>> + clk_dm(IMXRT1050_CLK_PLL1_ARM,
> >>> + imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_arm",
> >>> "pll1_arm_ref_sel",
> >>> + base + 0x0, 0x7f));
> >>> + clk_dm(IMXRT1050_CLK_PLL2_SYS,
> >>> + imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_sys",
> >>> "pll2_sys_ref_sel",
> >>> + base + 0x30, 0x1));
> >>> + clk_dm(IMXRT1050_CLK_PLL3_USB_OTG,
> >>> + imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg",
> >>> + "pll3_usb_otg_ref_sel",
> >>> + base + 0x10, 0x1));
> >>> + clk_dm(IMXRT1050_CLK_PLL5_VIDEO,
> >>> + imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video",
> >>> "pll5_video_ref_sel",
> >>> + base + 0xa0, 0x7f));
> >>> +
> >>> + /* PLL bypass out */
> >>> + clk_dm(IMXRT1050_CLK_PLL1_BYPASS,
> >>> + imx_clk_mux_flags("pll1_bypass", base + 0x0, 16,
> >>> 1,
> >>> + pll1_bypass_sels,
> >>> + ARRAY_SIZE(pll1_bypass_sels),
> >>> + CLK_SET_RATE_PARENT));
> >>> + clk_dm(IMXRT1050_CLK_PLL2_BYPASS,
> >>> + imx_clk_mux_flags("pll2_bypass", base + 0x30, 16,
> >>> 1,
> >>> + pll2_bypass_sels,
> >>> + ARRAY_SIZE(pll2_bypass_sels),
> >>> + CLK_SET_RATE_PARENT));
> >>> + clk_dm(IMXRT1050_CLK_PLL3_BYPASS,
> >>> + imx_clk_mux_flags("pll3_bypass", base + 0x10, 16,
> >>> 1,
> >>> + pll3_bypass_sels,
> >>> + ARRAY_SIZE(pll3_bypass_sels),
> >>> + CLK_SET_RATE_PARENT));
> >>> + clk_dm(IMXRT1050_CLK_PLL5_BYPASS,
> >>> + imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16,
> >>> 1,
> >>> + pll5_bypass_sels,
> >>> + ARRAY_SIZE(pll5_bypass_sels),
> >>> + CLK_SET_RATE_PARENT));
> >>> +
> >>> + clk_dm(IMXRT1050_CLK_VIDEO_POST_DIV_SEL,
> >>> + imx_clk_divider("video_post_div_sel",
> >>> "pll5_video",
> >>> + base + 0xa0, 19, 2));
> >>> + clk_dm(IMXRT1050_CLK_VIDEO_DIV,
> >>> + imx_clk_divider("video_div", "video_post_div_sel",
> >>> + base + 0x170, 30, 2));
> >>> +
> >>> + clk_dm(IMXRT1050_CLK_PLL3_80M,
> >>> + imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg",
> >>> 1, 6)); +
> >>> + clk_dm(IMXRT1050_CLK_PLL2_PFD0_352M,
> >>> + imx_clk_pfd("pll2_pfd0_352m", "pll2_sys", base +
> >>> 0x100, 0));
> >>> + clk_dm(IMXRT1050_CLK_PLL2_PFD1_594M,
> >>> + imx_clk_pfd("pll2_pfd1_594m", "pll2_sys", base +
> >>> 0x100, 1));
> >>> + clk_dm(IMXRT1050_CLK_PLL2_PFD2_396M,
> >>> + imx_clk_pfd("pll2_pfd2_396m", "pll2_sys", base +
> >>> 0x100, 2));
> >>> + clk_dm(IMXRT1050_CLK_PLL3_PFD1_664_62M,
> >>> + imx_clk_pfd("pll3_pfd1_664_62m", "pll3_usb_otg",
> >>> base
> >>> + 0xf0,
> >>> + 1));
> >>> + clk_dm(IMXRT1050_CLK_PLL3_PFD3_454_74M,
> >>> + imx_clk_pfd("pll3_pfd3_454_74m", "pll3_usb_otg",
> >>> base
> >>> + 0xf0,
> >>> + 3));
> >>> +
> >>> + /* CCM clocks */
> >>> + base = dev_read_addr_ptr(dev);
> >>> + if (base == (void *)FDT_ADDR_T_NONE)
> >>> + return -EINVAL;
> >>> +
> >>> + clk_dm(IMXRT1050_CLK_ARM_PODF,
> >>> + imx_clk_divider("arm_podf", "pll1_arm",
> >>> + base + 0x10, 0, 3));
> >>> +
> >>> + clk_dm(IMXRT1050_CLK_PRE_PERIPH_SEL,
> >>> + imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2,
> >>> + pre_periph_sels,
> >>> ARRAY_SIZE(pre_periph_sels)));
> >>> + clk_dm(IMXRT1050_CLK_PERIPH_SEL,
> >>> + imx_clk_mux("periph_sel", base + 0x14, 25, 1,
> >>> + periph_sels,
> >>> ARRAY_SIZE(periph_sels)));
> >>> + clk_dm(IMXRT1050_CLK_USDHC1_SEL,
> >>> + imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1,
> >>> + usdhc_sels, ARRAY_SIZE(usdhc_sels)));
> >>> + clk_dm(IMXRT1050_CLK_USDHC2_SEL,
> >>> + imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1,
> >>> + usdhc_sels, ARRAY_SIZE(usdhc_sels)));
> >>> + clk_dm(IMXRT1050_CLK_LPUART_SEL,
> >>> + imx_clk_mux("lpuart_sel", base + 0x24, 6, 1,
> >>> + lpuart_sels,
> >>> ARRAY_SIZE(lpuart_sels)));
> >>> + clk_dm(IMXRT1050_CLK_SEMC_ALT_SEL,
> >>> + imx_clk_mux("semc_alt_sel", base + 0x14, 7, 1,
> >>> + semc_alt_sels,
> >>> ARRAY_SIZE(semc_alt_sels)));
> >>> + clk_dm(IMXRT1050_CLK_SEMC_SEL,
> >>> + imx_clk_mux("semc_sel", base + 0x14, 6, 1,
> >>> + semc_sels, ARRAY_SIZE(semc_sels)));
> >>> + clk_dm(IMXRT1050_CLK_LCDIF_SEL,
> >>> + imx_clk_mux("lcdif_sel", base + 0x38, 15, 3,
> >>> + lcdif_sels, ARRAY_SIZE(lcdif_sels)));
> >>> +
> >>> + clk_dm(IMXRT1050_CLK_AHB_PODF,
> >>> + imx_clk_divider("ahb_podf", "periph_sel",
> >>> + base + 0x14, 10, 3));
> >>> + clk_dm(IMXRT1050_CLK_USDHC1_PODF,
> >>> + imx_clk_divider("usdhc1_podf", "usdhc1_sel",
> >>> + base + 0x24, 11, 3));
> >>> + clk_dm(IMXRT1050_CLK_USDHC2_PODF,
> >>> + imx_clk_divider("usdhc2_podf", "usdhc2_sel",
> >>> + base + 0x24, 16, 3));
> >>> + clk_dm(IMXRT1050_CLK_LPUART_PODF,
> >>> + imx_clk_divider("lpuart_podf", "lpuart_sel",
> >>> + base + 0x24, 0, 6));
> >>> + clk_dm(IMXRT1050_CLK_SEMC_PODF,
> >>> + imx_clk_divider("semc_podf", "semc_sel",
> >>> + base + 0x14, 16, 3));
> >>> + clk_dm(IMXRT1050_CLK_LCDIF_PRED,
> >>> + imx_clk_divider("lcdif_pred", "lcdif_sel",
> >>> + base + 0x38, 12, 3));
> >>> + clk_dm(IMXRT1050_CLK_LCDIF_PODF,
> >>> + imx_clk_divider("lcdif_podf", "lcdif_pred",
> >>> + base + 0x18, 23, 3));
> >>> +
> >>> + clk_dm(IMXRT1050_CLK_USDHC1,
> >>> + imx_clk_gate2("usdhc1", "usdhc1_podf", base +
> >>> 0x80, 2));
> >>> + clk_dm(IMXRT1050_CLK_USDHC2,
> >>> + imx_clk_gate2("usdhc2", "usdhc2_podf", base +
> >>> 0x80, 4));
> >>> + clk_dm(IMXRT1050_CLK_LPUART1,
> >>> + imx_clk_gate2("lpuart1", "lpuart_podf", base +
> >>> 0x7c, 24));
> >>> + clk_dm(IMXRT1050_CLK_SEMC,
> >>> + imx_clk_gate2("semc", "semc_podf", base + 0x74,
> >>> 4));
> >>> + clk_dm(IMXRT1050_CLK_LCDIF,
> >>> + imx_clk_gate2("lcdif", "lcdif_podf", base + 0x70,
> >>> 28)); +
> >>> +#ifdef CONFIG_SPL_BUILD
> >>> + struct clk *clk, *clk1;
> >>> +
> >>> + /* bypass pll1 before setting its rate */
> >>> + clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk);
> >>> + clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1);
> >>> + clk_set_parent(clk1, clk);
> >>> +
> >>> + clk_get_by_id(IMXRT1050_CLK_PLL1_ARM, &clk);
> >>> + clk_enable(clk);
> >>> + clk_set_rate(clk, 1056000000UL);
> >>> +
> >>> + clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1);
> >>> + clk_set_parent(clk1, clk);
> >>> +
> >>> + clk_get_by_id(IMXRT1050_CLK_SEMC_SEL, &clk1);
> >>> + clk_get_by_id(IMXRT1050_CLK_SEMC_ALT_SEL, &clk);
> >>> + clk_set_parent(clk1, clk);
> >>> +
> >>> + clk_get_by_id(IMXRT1050_CLK_PLL2_SYS, &clk);
> >>> + clk_enable(clk);
> >>> + clk_set_rate(clk, 528000000UL);
> >>> +
> >>> + clk_get_by_id(IMXRT1050_CLK_PLL2_BYPASS, &clk1);
> >>> + clk_set_parent(clk1, clk);
> >>> +
> >>> + /* Configure PLL3_USB_OTG to 480MHz */
> >>> + clk_get_by_id(IMXRT1050_CLK_PLL3_USB_OTG, &clk);
> >>> + clk_enable(clk);
> >>> + clk_set_rate(clk, 480000000UL);
> >>> +
> >>> + clk_get_by_id(IMXRT1050_CLK_PLL3_BYPASS, &clk1);
> >>> + clk_set_parent(clk1, clk);
> >>> +
> >>> +#endif
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static const struct udevice_id imxrt1050_clk_ids[] = {
> >>> + { .compatible = "fsl,imxrt1050-ccm" },
> >>> + { },
> >>> +};
> >>> +
> >>> +U_BOOT_DRIVER(imxrt1050_clk) = {
> >>> + .name = "clk_imxrt1050",
> >>> + .id = UCLASS_CLK,
> >>> + .of_match = imxrt1050_clk_ids,
> >>> + .ops = &imxrt1050_clk_ops,
> >>> + .probe = imxrt1050_clk_probe,
> >>> + .flags = DM_FLAG_PRE_RELOC,
> >>> +};
> >>> diff --git a/include/dt-bindings/clock/imxrt1050-clock.h
> >>> b/include/dt-bindings/clock/imxrt1050-clock.h new file mode 100644
> >>> index 0000000000..9f7f9be59f
> >>> --- /dev/null
> >>> +++ b/include/dt-bindings/clock/imxrt1050-clock.h
> >>> @@ -0,0 +1,65 @@
> >>> +/* SPDX-License-Identifier: GPL-2.0+ */
> >>> +/*
> >>> + * Copyright(C) 2019
> >>> + * Author(s): Giulio Benetti
> >>> <giulio.bene...@benettiengineering.com>
> >>> + */
> >>> +
> >>> +#ifndef __DT_BINDINGS_CLOCK_IMXRT1050_H
> >>> +#define __DT_BINDINGS_CLOCK_IMXRT1050_H
> >>> +
> >>> +#define IMXRT1050_CLK_DUMMY 0
> >>> +#define IMXRT1050_CLK_CKIL 1
> >>> +#define IMXRT1050_CLK_CKIH 2
> >>> +#define IMXRT1050_CLK_OSC 3
> >>> +#define IMXRT1050_CLK_PLL2_PFD0_352M 4
> >>> +#define IMXRT1050_CLK_PLL2_PFD1_594M 5
> >>> +#define IMXRT1050_CLK_PLL2_PFD2_396M 6
> >>> +#define IMXRT1050_CLK_PLL3_PFD0_720M 7
> >>> +#define IMXRT1050_CLK_PLL3_PFD1_664_62M 8
> >>> +#define IMXRT1050_CLK_PLL3_PFD2_508_24M 9
> >>> +#define IMXRT1050_CLK_PLL3_PFD3_454_74M 10
> >>> +#define IMXRT1050_CLK_PLL2_198M 11
> >>> +#define IMXRT1050_CLK_PLL3_120M 12
> >>> +#define IMXRT1050_CLK_PLL3_80M 13
> >>> +#define IMXRT1050_CLK_PLL3_60M 14
> >>> +#define IMXRT1050_CLK_PLL1_BYPASS 15
> >>> +#define IMXRT1050_CLK_PLL2_BYPASS 16
> >>> +#define IMXRT1050_CLK_PLL3_BYPASS 17
> >>> +#define IMXRT1050_CLK_PLL5_BYPASS 19
> >>> +#define IMXRT1050_CLK_PLL1_REF_SEL 30
> >>> +#define IMXRT1050_CLK_PLL2_REF_SEL 31
> >>> +#define IMXRT1050_CLK_PLL3_REF_SEL 32
> >>> +#define IMXRT1050_CLK_PLL5_REF_SEL 34
> >>> +#define IMXRT1050_CLK_PRE_PERIPH_SEL 44
> >>> +#define IMXRT1050_CLK_PERIPH_SEL 45
> >>> +#define IMXRT1050_CLK_SEMC_ALT_SEL 46
> >>> +#define IMXRT1050_CLK_SEMC_SEL 47
> >>> +#define IMXRT1050_CLK_USDHC1_SEL 48
> >>> +#define IMXRT1050_CLK_USDHC2_SEL 49
> >>> +#define IMXRT1050_CLK_LPUART_SEL 50
> >>> +#define IMXRT1050_CLK_LCDIF_SEL 51
> >>> +#define IMXRT1050_CLK_VIDEO_POST_DIV_SEL 52
> >>> +#define IMXRT1050_CLK_VIDEO_DIV 53
> >>> +#define IMXRT1050_CLK_ARM_PODF 90
> >>> +#define IMXRT1050_CLK_LPUART_PODF 91
> >>> +#define IMXRT1050_CLK_USDHC1_PODF 92
> >>> +#define IMXRT1050_CLK_USDHC2_PODF 93
> >>> +#define IMXRT1050_CLK_SEMC_PODF 94
> >>> +#define IMXRT1050_CLK_AHB_PODF 95
> >>> +#define IMXRT1050_CLK_LCDIF_PRED 96
> >>> +#define IMXRT1050_CLK_LCDIF_PODF 97
> >>> +#define IMXRT1050_CLK_USDHC1 163
> >>> +#define IMXRT1050_CLK_USDHC2 164
> >>> +#define IMXRT1050_CLK_LPUART1 165
> >>> +#define IMXRT1050_CLK_SEMC 166
> >>> +#define IMXRT1050_CLK_LCDIF 167
> >>> +#define IMXRT1050_CLK_PLL1_ARM 170
> >>> +#define IMXRT1050_CLK_PLL2_SYS 171
> >>> +#define IMXRT1050_CLK_PLL3_USB_OTG 172
> >>> +#define IMXRT1050_CLK_PLL4_AUDIO 173
> >>> +#define IMXRT1050_CLK_PLL5_VIDEO 174
> >>> +#define IMXRT1050_CLK_PLL6_ENET 176
> >>> +#define IMXRT1050_CLK_PLL7_USB_HOST 177
> >>> +#define IMXRT1050_CLK_END 266
>
> Here all the clocks have number "holes", since it's probable I'll
> have to add other clocks in the middle, but this breaks *_CLK_END
> count. Would it be better if I compact all the indexes and move them
> when I will add new clocks?
Please be in sync with the Linux kernel CCF driver for i.MX SoC.
When I was porting the driver from Linux to U-Boot I've realized that
one would need at least +1KiB of RAM/OCRAM to accommodate the original
driver's clock structures. For that reason I've put those clocks in
U-Boot in linked-list, which is less memory hungry (and with the
assumption that we just set clocks once during boot it seems to be good
enough).
>
> Best regards
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
pgpjjhwFCZ5FC.pgp
Description: OpenPGP digital signature
