[PATCH v3 13/21] net: phy: realtek: Add support for RTL8201F PHY module.

[Amit Singh Tomar]

This patch adds support for Realtek PHY RTL8201F 10/100Mbs(with variants: 
RTL8201FN and RTL8201FL)
PHYceiver. It can be found on Actions Semi Cubieboard7 board.

Signed-off-by: Amit Singh Tomar <amittome...@gmail.com>
---
Changes since v2:
        * Newly added patch, not there in v2/v1.
---
 drivers/net/phy/realtek.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 8f1d759..b9c373b 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -157,6 +157,14 @@ static int rtl8211x_config(struct phy_device *phydev)
        return 0;
 }
 
+/* RealTek RTL8201F */
+static int rtl8201f_config(struct phy_device *phydev)
+{
+       genphy_config_aneg(phydev);
+
+       return 0;
+}
+
 static int rtl8211f_config(struct phy_device *phydev)
 {
        u16 reg;
@@ -386,12 +394,24 @@ static struct phy_driver RTL8211F_driver = {
        .writeext = &rtl8211f_phy_extwrite,
 };
 
+/* Support for RTL8201F PHY */
+static struct phy_driver RTL8201F_driver = {
+       .name = "RealTek RTL8201F 10/100Mbps Ethernet",
+       .uid = 0x1cc816,
+       .mask = 0xffffff,
+       .features = PHY_BASIC_FEATURES,
+       .config = &rtl8201f_config,
+       .startup = &rtl8211e_startup,
+       .shutdown = &genphy_shutdown,
+};
+
 int phy_realtek_init(void)
 {
        phy_register(&RTL8211B_driver);
        phy_register(&RTL8211E_driver);
        phy_register(&RTL8211F_driver);
        phy_register(&RTL8211DN_driver);
+       phy_register(&RTL8201F_driver);
 
        return 0;
 }
-- 
2.7.4