[PATCH v3 19/21] arm: dts: s700: add node for ethernet controller

[Amit Singh Tomar]

This patch adds node for ethernet controller(found on Action Semi S700 SoC).

Since, there is no upstream Linux binding exist for S700 ethernet controller, 
Changes
are put in u-boot specific dtsi file.

Signed-off-by: Amit Singh Tomar <amittome...@gmail.com>
---
Changes since v2:
        * Newly added patch, not there in v2/v1.
---
 arch/arm/dts/s700-u-boot.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/dts/s700-u-boot.dtsi b/arch/arm/dts/s700-u-boot.dtsi
index 4a33042..489d0f5 100644
--- a/arch/arm/dts/s700-u-boot.dtsi
+++ b/arch/arm/dts/s700-u-boot.dtsi
@@ -12,6 +12,21 @@
                        compatible = "actions,s700-reset";
                        reg = <0 0xe01680a8 0 0x8>;
                };
+
+               gmac:  ethernet@e0220000 {
+                       compatible = "actions,s700-ethernet";
+                       reg = <0 0xe0220000 0 0x2000>;
+                       interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "macirq";
+                       local-mac-address = [ 00 18 fe 66 66 66 ];
+                       clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
+                       clock-names = "ethernet", "rmii_ref";
+                       resets = <&reset 55>;
+                       reset-names = "ethernet";
+                       phy-mode = "rmii";
+
+                       status = "okay";
+               };
        };
 };
 
-- 
2.7.4