From: Tom Warren <twar...@nvidia.com>
Large kernels (>32MB) can fail to boot because they overwrite the FDT
address, corrupting the DTB. Stephen Warren had created a fix to
dynamically adjust the fdt/ramdisk/pxefile/kernel addr vars at boot time
for T186, which allows a large kernel to load and boot.
This is based on his commit, but applied to the tegraXXX-common.h
headers so it's used on all T186 and T210 Jetson boards. Note that I've
put the kernel 'size' param at 0x03000000, or 48MB, to leave room for
kernel growth. Current L4T kernels are running at about 32MB.
Signed-off-by: Tom Warren <twar...@nvidia.com>
---
include/configs/p2771-0000.h | 23 ++---------------------
include/configs/tegra186-common.h | 22 ++++++++++++++++++++--
include/configs/tegra210-common.h | 23 ++++++++++++++++++++---
3 files changed, 42 insertions(+), 26 deletions(-)
diff --git a/include/configs/p2771-0000.h b/include/configs/p2771-0000.h
index 7c6d68a..90d764f 100644
--- a/include/configs/p2771-0000.h
+++ b/include/configs/p2771-0000.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright (c) 2013-2016, NVIDIA CORPORATION.
+ * Copyright (c) 2013-2020, NVIDIA CORPORATION.
+ *
*/
#ifndef _P2771_0000_H
@@ -17,26 +18,6 @@
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 2
-#define BOARD_EXTRA_ENV_SETTINGS \
- "calculated_vars=kernel_addr_r fdt_addr_r scriptaddr pxefile_addr_r " \
- "ramdisk_addr_r\0" \
- "kernel_addr_r_align=00200000\0" \
- "kernel_addr_r_offset=00080000\0" \
- "kernel_addr_r_size=02000000\0" \
- "kernel_addr_r_aliases=loadaddr\0" \
- "fdt_addr_r_align=00200000\0" \
- "fdt_addr_r_offset=00000000\0" \
- "fdt_addr_r_size=00200000\0" \
- "scriptaddr_align=00200000\0" \
- "scriptaddr_offset=00000000\0" \
- "scriptaddr_size=00200000\0" \
- "pxefile_addr_r_align=00200000\0" \
- "pxefile_addr_r_offset=00000000\0" \
- "pxefile_addr_r_size=00200000\0" \
- "ramdisk_addr_r_align=00200000\0" \
- "ramdisk_addr_r_offset=00000000\0" \
- "ramdisk_addr_r_size=02000000\0"
-
#include "tegra-common-post.h"
/* Crystal is 38.4MHz. clk_m runs at half that rate */
diff --git a/include/configs/tegra186-common.h
b/include/configs/tegra186-common.h
index b4936cc..e88e68d 100644
--- a/include/configs/tegra186-common.h
+++ b/include/configs/tegra186-common.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright 2013-2016, NVIDIA CORPORATION.
+ * Copyright (c) 2013-2020, NVIDIA CORPORATION.
*/
#ifndef _TEGRA186_COMMON_H_
@@ -50,6 +50,24 @@
"pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"fdt_addr_r=0x82000000\0" \
- "ramdisk_addr_r=0x82100000\0"
+ "ramdisk_addr_r=0x82100000\0" \
+ "calculated_vars=kernel_addr_r fdt_addr_r scriptaddr pxefile_addr_r " \
+ "ramdisk_addr_r\0" \
+ "kernel_addr_r_align=00200000\0" \
+ "kernel_addr_r_offset=00080000\0" \
+ "kernel_addr_r_size=03000000\0" \
+ "kernel_addr_r_aliases=loadaddr\0" \
+ "fdt_addr_r_align=00200000\0" \
+ "fdt_addr_r_offset=00000000\0" \
+ "fdt_addr_r_size=00200000\0" \
+ "scriptaddr_align=00200000\0" \
+ "scriptaddr_offset=00000000\0" \
+ "scriptaddr_size=00200000\0" \
+ "pxefile_addr_r_align=00200000\0" \
+ "pxefile_addr_r_offset=00000000\0" \
+ "pxefile_addr_r_size=00200000\0" \
+ "ramdisk_addr_r_align=00200000\0" \
+ "ramdisk_addr_r_offset=00000000\0" \
+ "ramdisk_addr_r_size=02000000\0"
#endif
diff --git a/include/configs/tegra210-common.h
b/include/configs/tegra210-common.h
index 1c53311..0d15b30 100644
--- a/include/configs/tegra210-common.h
+++ b/include/configs/tegra210-common.h
@@ -1,7 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * (C) Copyright 2013-2015
- * NVIDIA Corporation <www.nvidia.com>
+ * Copyright (c) 2013-2020, NVIDIA CORPORATION.
*/
#ifndef _TEGRA210_COMMON_H_
@@ -47,7 +46,25 @@
"pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"fdt_addr_r=0x82000000\0" \
- "ramdisk_addr_r=0x82100000\0"
+ "ramdisk_addr_r=0x82100000\0" \
+ "calculated_vars=kernel_addr_r fdt_addr_r scriptaddr pxefile_addr_r " \
+ "ramdisk_addr_r\0" \
+ "kernel_addr_r_align=00200000\0" \
+ "kernel_addr_r_offset=00080000\0" \
+ "kernel_addr_r_size=03000000\0" \
+ "kernel_addr_r_aliases=loadaddr\0" \
+ "fdt_addr_r_align=00200000\0" \
+ "fdt_addr_r_offset=00000000\0" \
+ "fdt_addr_r_size=00200000\0" \
+ "scriptaddr_align=00200000\0" \
+ "scriptaddr_offset=00000000\0" \
+ "scriptaddr_size=00200000\0" \
+ "pxefile_addr_r_align=00200000\0" \
+ "pxefile_addr_r_offset=00000000\0" \
+ "pxefile_addr_r_size=00200000\0" \
+ "ramdisk_addr_r_align=00200000\0" \
+ "ramdisk_addr_r_offset=00000000\0" \
+ "ramdisk_addr_r_size=02000000\0"
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
--
1.8.2.1.610.g562af5b
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may
contain
confidential information. Any unauthorized review, use, disclosure or
distribution
is prohibited. If you are not the intended recipient, please contact the
sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------
