From: Chen-Yu Tsai <w...@csie.org>
The device tree file for rk3328-evb in the Linux kernel does not have
gmac2io enabled. Instead, gmac2phy is enabled, but that is not supported
in U-boot.
Move the gmac2io related nodes to rk3328-evb-u-boot.dtsi to preserve the
current functionality. When the device tree files are synced, gmac2phy
should be marked as "broken" in -u-boot.dtsi files.
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Tested-by: Loic Devulder <ldevul...@suse.com>
Tested-by: Peter Geis <pgwipe...@gmail.com>
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
Changes since v2:
- none
Changes since v1:
- Added Kever's reviewed-by
---
arch/arm/dts/rk3328-evb-u-boot.dtsi | 23 +++++++++++++++++++++++
arch/arm/dts/rk3328-evb.dts | 23 -----------------------
2 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi
b/arch/arm/dts/rk3328-evb-u-boot.dtsi
index 5679897279aa..8ba53cf8f44b 100644
--- a/arch/arm/dts/rk3328-evb-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi
@@ -7,6 +7,13 @@
#include "rk3328-sdram-ddr3-666.dtsi"
/{
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
compatible = "regulator-fixed";
enable-active-high;
@@ -17,6 +24,22 @@
};
};
+&gmac2io {
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_pins>;
+ tx_delay = <0x26>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
&usb_host0_xhci {
vbus-supply = <&vcc5v0_host_xhci>;
status = "okay";
diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts
index e9bc849f8c23..97bef37cf610 100644
--- a/arch/arm/dts/rk3328-evb.dts
+++ b/arch/arm/dts/rk3328-evb.dts
@@ -14,13 +14,6 @@
stdout-path = &uart2;
};
- gmac_clkin: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "gmac_clkin";
- #clock-cells = <0>;
- };
-
vcc3v3_sdmmc: sdmmc-pwren {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
@@ -78,22 +71,6 @@
status = "okay";
};
-&gmac2io {
- phy-supply = <&vcc_phy>;
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
- assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmiim1_pins>;
- tx_delay = <0x26>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
&usb_host0_ehci {
status = "okay";
};
--
2.26.0
