From: Chen-Yu Tsai <w...@csie.org>
USB 3.0 is only supported in U-boot, not in the Linux kernel where the
device tree files are ultimately synced from. While the xhci node was
moved, the external vbus regulator was not.
Move it as well.
Fixes: 2e91e2025c1b ("rockchip: rk3328: migrate u-boot node to -u-boot.dtsi")
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Tested-by: Loic Devulder <ldevul...@suse.com>
Tested-by: Peter Geis <pgwipe...@gmail.com>
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
Changes since v2:
- none
Changes since v1:
- Added Kever's reviewed-by
---
arch/arm/dts/rk3328-evb-u-boot.dtsi | 11 +++++++++++
arch/arm/dts/rk3328-evb.dts | 9 ---------
2 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi
b/arch/arm/dts/rk3328-evb-u-boot.dtsi
index 4a827063c555..5679897279aa 100644
--- a/arch/arm/dts/rk3328-evb-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi
@@ -6,6 +6,17 @@
#include "rk3328-u-boot.dtsi"
#include "rk3328-sdram-ddr3-666.dtsi"
+/{
+ vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vcc5v0_host_xhci";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
&usb_host0_xhci {
vbus-supply = <&vcc5v0_host_xhci>;
status = "okay";
diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts
index a2ee838fcd6b..e9bc849f8c23 100644
--- a/arch/arm/dts/rk3328-evb.dts
+++ b/arch/arm/dts/rk3328-evb.dts
@@ -38,15 +38,6 @@
regulator-max-microvolt = <5000000>;
};
- vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
- compatible = "regulator-fixed";
- enable-active-high;
- regulator-name = "vcc5v0_host_xhci";
- gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_phy";
--
2.26.0
