Hi Giulio, On Mon, Apr 27, 2020 at 12:11 PM Giulio Benetti <giulio.bene...@benettiengineering.com> wrote: > > Make "of=" the same for the 2 commands since we're writing to the same > sd-card. > > Signed-off-by: Giulio Benetti <giulio.bene...@benettiengineering.com> > --- > board/freescale/imxrt1050-evk/README | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/freescale/imxrt1050-evk/README > b/board/freescale/imxrt1050-evk/README > index f7e2894025..55b6a0877a 100644 > --- a/board/freescale/imxrt1050-evk/README > +++ b/board/freescale/imxrt1050-evk/README > @@ -11,7 +11,7 @@ This will generate the SPL image called SPL and the > u-boot.img. > > - Flash the SPL image into the micro SD card: > > -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync > +sudo dd if=SPL of=/dev/sdb bs=1k seek=1; sync
I usually prefer to write /dev/sdX instead because someone may follow the instructions as is and inadvertently kill their hard disk or another device that may appear at /dev/sdb.