On 4/27/20 5:34 PM, Fabio Estevam wrote:
Hi Giulio,
On Mon, Apr 27, 2020 at 12:11 PM Giulio Benetti
<giulio.bene...@benettiengineering.com> wrote:
Make "of=" the same for the 2 commands since we're writing to the same
sd-card.
Signed-off-by: Giulio Benetti <giulio.bene...@benettiengineering.com>
---
board/freescale/imxrt1050-evk/README | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/imxrt1050-evk/README
b/board/freescale/imxrt1050-evk/README
index f7e2894025..55b6a0877a 100644
--- a/board/freescale/imxrt1050-evk/README
+++ b/board/freescale/imxrt1050-evk/README
@@ -11,7 +11,7 @@ This will generate the SPL image called SPL and the
u-boot.img.
- Flash the SPL image into the micro SD card:
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+sudo dd if=SPL of=/dev/sdb bs=1k seek=1; sync
I usually prefer to write /dev/sdX instead because someone may follow
the instructions as is and inadvertently kill their hard disk or
another device that may appear at /dev/sdb.
Oh, that's right.
I send V3 with that corrected.
Thank you
--
Giulio Benetti
Benetti Engineering sas