Hi Peng, On Tue, May 12, 2020 at 6:16 AM Peng Fan <peng....@nxp.com> wrote: > > Drop useless getting ccm device, there is no need to explicted do this > in board code, and we not enable SPL CLK currently. > > Signed-off-by: Peng Fan <peng....@nxp.com>
I got an error while applying this patch: patching file board/freescale/imx8mp_evk/spl.c Hunk #2 FAILED at 39. 1 out of 2 hunks FAILED -- saving rejects to file board/freescale/imx8mp_evk/spl.c.rej I fixed it manually and applied the whole series plus this watchdog one: https://patchwork.ozlabs.org/project/uboot/patch/20200511140031.8862-4-feste...@gmail.com/ I get an "alloc space exhausted" error message though: U-Boot SPL 2020.07-rc2-dirty (May 12 2020 - 08:29:04 -0300) Normal Boot WDT: Started with servicing (60s timeout) Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.07-rc2-dirty (May 12 2020 - 08:29:04 -0300) alloc space exhausted CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Despite the alloc error, the boot completes and the 'reset' command works. I am still not able to boot a imx_5.4.3_2.0.0 NXP kernel though as it hangs after the serial driver is probed: https://pastebin.com/raw/ix5dnGub Are you able to boot an imx_5.4.3_2.0.0 NXP kernel? If so, can you please share your ATF and LPDDR4 firmware files? Thanks
