> Subject: Re: [PATCH V2 1/5] imx8mp_evk: spl: drop useless code > > Hi Peng, > > On Tue, May 12, 2020 at 6:16 AM Peng Fan <peng....@nxp.com> wrote: > > > > Drop useless getting ccm device, there is no need to explicted do this > > in board code, and we not enable SPL CLK currently. > > > > Signed-off-by: Peng Fan <peng....@nxp.com> > > I got an error while applying this patch: > > patching file board/freescale/imx8mp_evk/spl.c Hunk #2 FAILED at 39. > 1 out of 2 hunks FAILED -- saving rejects to file > board/freescale/imx8mp_evk/spl.c.rej
Ok. I'll rebase and try. > > I fixed it manually and applied the whole series plus this watchdog one: > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatch > work.ozlabs.org%2Fproject%2Fuboot%2Fpatch%2F20200511140031.8862-4-f > estevam%40gmail.com%2F&data=02%7C01%7Cpeng.fan%40nxp.com% > 7Cc16790e08601447b539c08d7f669a3ef%7C686ea1d3bc2b4c6fa92cd99c5c > 301635%7C0%7C0%7C637248805891280120&sdata=4rvjaQt%2BoWw6 > 45GNynVYVJavcf6XU%2FhS0K3cfqKyRUM%3D&reserved=0 > > I get an "alloc space exhausted" error message though: > > U-Boot SPL 2020.07-rc2-dirty (May 12 2020 - 08:29:04 -0300) Normal Boot > WDT: Started with servicing (60s timeout) > Trying to boot from BOOTROM > image offset 0x8000, pagesize 0x200, ivt offset 0x0 > > > U-Boot 2020.07-rc2-dirty (May 12 2020 - 08:29:04 -0300) > > alloc space exhausted > CPU: Freescale i.MX8MP rev1.0 at 1000 MHz > > Despite the alloc error, the boot completes and the 'reset' command works. I not met this error. Which commit hash are you using? > > I am still not able to boot a imx_5.4.3_2.0.0 NXP kernel though as it hangs > after the serial driver is probed: > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpasteb > in.com%2Fraw%2Fix5dnGub&data=02%7C01%7Cpeng.fan%40nxp.com% > 7Cc16790e08601447b539c08d7f669a3ef%7C686ea1d3bc2b4c6fa92cd99c5c > 301635%7C0%7C0%7C637248805891290111&sdata=z4rJdfJsEEeDux%2 > Fs3VGs291EPuwYLjeYH981boDooEo%3D&reserved=0 > > Are you able to boot an imx_5.4.3_2.0.0 NXP kernel? > > If so, can you please share your ATF and LPDDR4 firmware files? I am using local latest 5.4 atf/kernel. I'll send you the link private. Regards, Peng. > > Thanks