Okay, thanks for the fast reply! At the time I wrote this mail, I didn't read the docs.
Off-topic: Are there plans for U-Boot to create a default image (including FSBL, bitstream and U-Boot)? For example (additional build step): $ export BITSTREAM=/path/to/fpga.bit For now I use Vivado to create the bitstream file, Vitis for the FSBL and then bootgen to create the SD card image. On 01.06.20 at 07:43, Michal Simek wrote: > On 01. 06. 20 7:34, Milan Obuch wrote: >>> Hello, >>> >>> I just noticed that the support for the board Zybo-Z7 >>> in mainline U-Boot is no longer available. >>> >>> Are there some reasons why it was dropped? Couldn't >>> find any information in the list archive. >>> >>> Thanks in advance! >>> >>> -- >>> Best regards, >>> >>> Johannes K. >> >> I was about to ask similar question already, slightly different way. >> Michal decided to somehow unify Zynq based board support with common >> zynq_virtconfig (sp?) configuration, but I did not understand the >> details yet. So I would rephrase the question another way... >> >> How should one compile u-boot for Zybo Z7 board now and how should >> bootable image be created? > > > export DEVICE_TREE=zynq-zybo-z7 > make xilinx_zynq_virt_defconfig > make -j8 > > M >