On 02. 06. 20 17:55, Johannes Krottmayer wrote: > Add a short description in the ZYNQ documentation how to prepare a SD card > and > copy the related images to SD card. > > I think, it's necessary for the documentation to avoid such user questions > (like mine) in this list. > > Okay?
remove these 4 lines above from commit message and move it below ---. And no problem to extend documentation for newcomers. > > Signed-off-by: Johannes Krottmayer <krj...@gmail.com> > --- > doc/board/xilinx/zynq.rst | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/doc/board/xilinx/zynq.rst b/doc/board/xilinx/zynq.rst > index 6a09df1d15..e5f002af85 100644 > --- a/doc/board/xilinx/zynq.rst > +++ b/doc/board/xilinx/zynq.rst > @@ -60,6 +60,25 @@ SLCR bootmode register Bit[3:0] values > "modeboot" variable can assign any of "norboot", "sdboot" or "jtagboot" > bootmode strings at runtime. > > +Flashing > +-------- > + > +SD Card > +^^^^^^^ > + > +To write an image that boots from a SD card first create a FAT32 partition > +and a FAT32 filesystem on the SD card:: > + > + sudo fdisk /dev/sdx > + sudo mkfs.vfat -F 32 /dev/sdx1 > + > +Mount the SD card and copy the SPL and U-Boot to the root directory of the > +SD card:: > + > + sudo mount -t vfat /dev/sdx /mnt here should be /dev/sdx0 > + sudo cp spl/boot.bin /mnt > + sudo cp u-boot.img /mnt > + > Mainline status > --------------- > > Thanks, Michal