On 03. 06. 20 11:01, Johannes Krottmayer wrote: > On 03.06.20 at 08:23, Michal Simek wrote: >> On 02. 06. 20 17:55, Johannes Krottmayer wrote: >>> Add a short description in the ZYNQ documentation how to prepare a SD card >>> and >>> copy the related images to SD card. >>> >>> I think, it's necessary for the documentation to avoid such user questions >>> (like mine) in this list. >>> >>> Okay? >> >> remove these 4 lines above from commit message and move it below ---. >> >> And no problem to extend documentation for newcomers. > > Thanks! > >>> >>> Signed-off-by: Johannes Krottmayer <krj...@gmail.com> >>> --- >>> doc/board/xilinx/zynq.rst | 19 +++++++++++++++++++ >>> 1 file changed, 19 insertions(+) >>> >>> diff --git a/doc/board/xilinx/zynq.rst b/doc/board/xilinx/zynq.rst >>> index 6a09df1d15..e5f002af85 100644 >>> --- a/doc/board/xilinx/zynq.rst >>> +++ b/doc/board/xilinx/zynq.rst >>> @@ -60,6 +60,25 @@ SLCR bootmode register Bit[3:0] values >>> "modeboot" variable can assign any of "norboot", "sdboot" or "jtagboot" >>> bootmode strings at runtime. >>> >>> +Flashing >>> +-------- >>> + >>> +SD Card >>> +^^^^^^^ >>> + >>> +To write an image that boots from a SD card first create a FAT32 partition >>> +and a FAT32 filesystem on the SD card:: >>> + >>> + sudo fdisk /dev/sdx >>> + sudo mkfs.vfat -F 32 /dev/sdx1 >>> + >>> +Mount the SD card and copy the SPL and U-Boot to the root directory of the >>> +SD card:: >>> + >>> + sudo mount -t vfat /dev/sdx /mnt >> >> here should be /dev/sdx0 >> > > Oops, sorry! But "/dev/sdx1" should be correct according to command > "sudo mkfs.vfat -F 32 /dev/sdx1". > > At least on my used system. Typo?
grr. yes 1 of course. M