>-----Original Message----- >From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Kuldeep Singh >Sent: Tuesday, June 23, 2020 3:07 PM >To: u-boot@lists.denx.de >Cc: Priyanka Jain <priyanka.j...@nxp.com>; Kuldeep Singh ><kuldeep.si...@nxp.com> >Subject: [PATCH] configs: ls1046aqds: Configure QSPI related configs > >LS1046A-QDS has "s25fl128s" flash of size with 16M with 64K sector size. >The board requires few spi-flash related configs to be updated in TFA and >QSPI _defconfigs. > >Following are the changes: >- Enable CONFIG_FSL_QSPI >- Unset CONFIG_SPI_FLASH_BAR >- Enable CONFIG_SYS_RELOC_GD_ENV_ADDR >- Restore CONFIG_ENV_ADDR to 0x60500000 > >Signed-off-by: Kuldeep Singh <kuldeep.si...@nxp.com> >--- > configs/ls1046aqds_tfa_SECURE_BOOT_defconfig | 2 ++ > configs/ls1046aqds_tfa_defconfig | 3 ++- > 2 files changed, 4 insertions(+), 1 deletion(-) > >diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig >b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig >index 2b84a6b..2780a41 100644 >--- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig >+++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig >@@ -47,6 +47,7 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y > CONFIG_SYS_FLASH_CFI=y > CONFIG_MTD_RAW_NAND=y > CONFIG_SF_DEFAULT_BUS=1 >+# CONFIG_SPI_FLASH_BAR is not set > CONFIG_SPI_FLASH_SPANSION=y > CONFIG_PHYLIB=y > CONFIG_PHYLIB_10G=y >@@ -63,6 +64,7 @@ CONFIG_SYS_NS16550=y > CONFIG_SPI=y > CONFIG_DM_SPI=y > CONFIG_FSL_DSPI=y >+CONFIG_FSL_QSPI=y > CONFIG_USB=y > CONFIG_DM_USB=y > CONFIG_USB_XHCI_HCD=y >diff --git a/configs/ls1046aqds_tfa_defconfig >b/configs/ls1046aqds_tfa_defconfig >index e412c05..9cb4592 100644 >--- a/configs/ls1046aqds_tfa_defconfig >+++ b/configs/ls1046aqds_tfa_defconfig >@@ -42,7 +42,8 @@ CONFIG_ENV_IS_IN_NAND=y >CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_BUS=y > CONFIG_ENV_SPI_BUS=0 >-CONFIG_ENV_ADDR=0x40500000 >+CONFIG_ENV_ADDR=0x60500000 >+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Please confirm that all boot-sources will work fine with this change. Regards Priyanka <snip>