On Wednesday 26 August 2020 11:57:01 Andre Heider wrote: > Hi, > > On 26/08/2020 10:31, Pali Rohár wrote: > > Hello! > > > > On Wednesday 26 August 2020 09:30:11 Andre Heider wrote: > > > Pali, > > > > > > thank you for all these espressobin fixes, much appreciated! > > > > > > This isn't directly related to the patch I'm replying to, but since you > > > seem > > > to be syncing down- with upstream: > > > > > > Upstream u-boot doesn't detect my sata ssd ("SATA link 0 timeout"), nor is > > > > Could you try following Marvell SATA/AHCI patch? > > https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/2c1571432e4fd298be0236b53511f415bbdd21ac > > will do that later and report my findings, thanks! > > > > it able to run debian's kernel (hangs after "Starting kernel"). Both work > > > with armbian's downstream flash-image.bin. > > > > > > I'm using the espressobin v1 with these patches from the list on top of > > > > Do you really have espressobin v1? I saw hw schemas and diagrams only > > for V3, V4, V5 and V7. And I tested only V5 as I do not have any other > > revisions. > > Oh sorry, I meant the first public version, the one with ddr3 memory. Which > would be the V5 schematics iirc. > > > > 2020.07: > > > arm64: a37xx: pci: Depends on DM_GPIO > > > arm: mvebu: Espressobin: Update README.marvell file > > > arm: mvebu: Espressobin: Define console env > > > arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases > > > arm: mvebu: Espressobin: Change default loadaddr > > > arm: mvebu: Espressobin: Move env load addresses > > > arm: mvebu: Espressobin: Setup MTD partitions when booting kernel > > > arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's > > > U-Boot > > > arm: dts: a37x0: enable sd card support on espressobin > > > mmc: xenon: set signal voltage and max base clock > > > arm64: a37xx: pci: Assert PERST# signal when unloading driver > > > arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT > > > arm64: dts: armada-3720-espressobin: fix COMPHY nodes > > > arm: mvebu: Espressobin: Enable CONFIG_MVNETA > > > arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan > > > ports > > > > > > Bootlog: > > > > > > TIM-1.0 > > > WTMI-devel-18.12.1- > > > WTMI: system early-init > > > CPU VDD voltage default value: 1.108V > > > NOTICE: Booting Trusted Firmware > > > NOTICE: BL1: v2.3(): (Marvell-devel-18.12.0) > > > NOTICE: BL1: Built : 06:12:46, Aug 26 2020 > > > NOTICE: BL1: Booting BL2 > > > NOTICE: BL2: v2.3(): (Marvell-devel-18.12.0) > > > NOTICE: BL2: Built : 06:12:46, Aug 26 2020 > > > NOTICE: BL1: Booting BL31 > > > NOTICE: BL31: v2.3(): (Marvell-devel-18.12.0) > > > NOTICE: BL31: Built : 06:12:46 > > > > > > U-Boot 2020.07 (Aug 26 2020 - 06:12:46 +0000) > > > > > > DRAM: 1 GiB > > > Comphy-0: USB3_HOST0 5 Gbps > > > Comphy-1: PEX0 2.5 Gbps > > > Comphy-2: SATA0 5 Gbps > > > SATA link 0 timeout. > > > AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode > > > flags: ncq led only pmp fbss pio slum part sxs > > > PCIE-0: Link up > > > MMC: sdhci@d0000: 0 > > > Loading Environment from SPI Flash... SF: Detected w25q32dw with page size > > > 256 Bytes, erase size 4 KiB, total 4 MiB > > > OK > > > Model: Marvell Armada 3720 Community Board ESPRESSOBin > > > Net: eth0: neta@30000 > > > Hit any key to stop autoboot: 0 > > > MMC Device 1 not found > > > no mmc device at slot 1 > > > switch to partitions #0, OK > > > mmc0 is current device > > > Scanning mmc 0:1... > > > Found U-Boot script /boot.scr > > > 2250 bytes read in 12 ms (182.6 KiB/s) > > > ## Executing script at 06d00000 > > > 22079344 bytes read in 1219 ms (17.3 MiB/s) > > > 10671 bytes read in 24 ms (433.6 KiB/s) > > > 27689238 bytes read in 1555 ms (17 MiB/s) > > > Booting Debian 5.7.0-0.bpo.2-arm64 from mmc 0:1... > > > ## Flattened Device Tree blob at 06f00000 > > > Booting using the fdt blob at 0x6f00000 > > > Loading Ramdisk to 3e0be000, end 3fb26116 ... OK > > > Loading Device Tree to 000000003e0b8000, end 000000003e0bd9ae ... OK > > > > > > Starting kernel ... > > > <hangs here> > > > > Can you write which commands you have run to load & boot kernel? > > What are command line arguments for kernel? > > > > Also have you reset env variables to default? > > Yeah, I do reset the full env when switching between the flash images.
Now I tried to boot openwrt kernel image and it is working fine on tested espressobin v5 unit. I compiled u-boot with all those a37xx patches. DRAM: 512 MiB Comphy-0: USB3_HOST0 5 Gbps Comphy-1: PEX0 2.5 Gbps Comphy-2: SATA0 5 Gbps SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: ncq led only pmp fbss pio slum part sxs PCIE-0: Link up MMC: sdhci@d0000: 0 Loading Environment from SPIFlash... SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB OK Model: Marvell Armada 3720 Community Board ESPRESSOBin Net: eth0: neta@30000 [PRIME] Hit any key to stop autoboot: 0 => env default -a ## Resetting to default environment => setenv bootargs "root=PARTUUID=aefd80c5-02 rw rootwait" => setenv bootargs "${bootargs} ${console}" => mmc dev 0 switch to partitions #0, OK mmc0 is current device => load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb 10630 bytes read in 11 ms (943.4 KiB/s) => load mmc 0:1 ${kernel_addr} Image 10197000 bytes read in 436 ms (22.3 MiB/s) => booti ${kernel_addr} - ${fdt_addr} Moving Image from 0x7000000 to 0x7080000, end=7a82000 ## Flattened Device Tree blob at 06f00000 Booting using the fdt blob at 0x6f00000 Loading Device Tree to 000000001fb20000, end 000000001fb25985 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.4.59 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r14241-ba2ddba56b)) #0 SMP Mon Aug 24 00:09:30 2020 [ 0.000000] Machine model: Globalscale Marvell ESPRESSOBin Board [ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '') [ 0.000000] printk: bootconsole [ar3700_uart0] enabled [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 16 pages/cpu s26520 r8192 d30824 u65536 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128512 [ 0.000000] Kernel command line: root=PARTUUID=aefd80c5-02 rw rootwait console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 ...