On 18.10.20 14:56, Baruch Siach wrote:
Align node properties to kernel dts node.
The change of compatible property does not affect any currently
supported board.
Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
with the current driver.
Signed-off-by: Baruch Siach <bar...@tkos.co.il>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
arch/arm/dts/armada-cp110-master.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/armada-cp110-master.dtsi
b/arch/arm/dts/armada-cp110-master.dtsi
index cd5c974482e6..7d0d31da306d 100644
--- a/arch/arm/dts/armada-cp110-master.dtsi
+++ b/arch/arm/dts/armada-cp110-master.dtsi
@@ -285,15 +285,18 @@
};
cpm_nand: nand@720000 {
- compatible = "marvell,mvebu-pxa3xx-nand";
- reg = <0x720000 0x100>;
+ compatible =
"marvell,armada-8k-nand-controller",
+ "marvell,armada370-nand-controller";
+ reg = <0x720000 0x54>;
#address-cells = <1>;
-
- clocks = <&cpm_syscon0 1 2>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&cpm_syscon0 1 2>,
+ <&cpm_syscon0 1 17>;
+ marvell,system-controller = <&cpm_syscon0>;
nand-enable-arbiter;
num-cs = <1>;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
status = "disabled";
};
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
