Signed-off-by: Shmuel Hazan <shmue...@siklu.com>
Signed-off-by: Baruch Siach <bar...@tkos.co.il>
---
drivers/mtd/nand/raw/Kconfig | 2 +
drivers/mtd/nand/raw/pxa3xx_nand.c | 117 +++++++++++++----------------
2 files changed, 55 insertions(+), 64 deletions(-)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index cd7e598aa8a7..08df12a3daf9 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -195,6 +195,8 @@ endif
config NAND_PXA3XX
bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
select SYS_NAND_SELF_INIT
+ select DM_MTD
+ select SYSCON
imply CMD_NAND
help
This enables the driver for the NAND flash device found on
diff --git a/drivers/mtd/nand/raw/pxa3xx_nand.c
b/drivers/mtd/nand/raw/pxa3xx_nand.c
index 5fb3081c8390..6f66db065357 100644
--- a/drivers/mtd/nand/raw/pxa3xx_nand.c
+++ b/drivers/mtd/nand/raw/pxa3xx_nand.c
@@ -22,6 +22,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/types.h>
+#include <dm/uclass.h>
+#include <dm/read.h>
#include "pxa3xx_nand.h"
@@ -417,6 +419,14 @@ static struct nand_ecclayout ecc_layout_8KB_bch8bit = {
/* convert nano-seconds to nand flash controller clock cycles */
#define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000)
+static const struct udevice_id pxa3xx_nand_dt_ids[] = {
+ {
+ .compatible = "marvell,mvebu-pxa3xx-nand",
+ .data = PXA3XX_NAND_VARIANT_ARMADA370,
+ },
+ {}
+};
+
static enum pxa3xx_nand_variant pxa3xx_nand_get_variant(void)
{
/* We only support the Armada 370/XP/38x for now */
@@ -1809,82 +1819,60 @@ fail_disable_clk:
return ret;
}
-static int pxa3xx_nand_probe_dt(struct pxa3xx_nand_info *info)
+static int pxa3xx_nand_probe_dt(struct udevice *dev, struct pxa3xx_nand_info
*info)
{
struct pxa3xx_nand_platform_data *pdata;
- const void *blob = gd->fdt_blob;
- int node = -1;
pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
- /* Get address decoding nodes from the FDT blob */
- do {
- node = fdt_node_offset_by_compatible(blob, node,
-
"marvell,mvebu-pxa3xx-nand");
- if (node < 0)
- break;
-
- /* Bypass disabeld nodes */
- if (!fdtdec_get_is_enabled(blob, node))
- continue;
-
- /* Get the first enabled NAND controler base address */
- info->mmio_base =
- (void __iomem *)fdtdec_get_addr_size_auto_noparent(
- blob, node, "reg", 0, NULL, true);
+ info->mmio_base = dev_read_addr_ptr(dev);
- pdata->num_cs = fdtdec_get_int(blob, node, "num-cs", 1);
- if (pdata->num_cs != 1) {
- pr_err("pxa3xx driver supports single CS only\n");
- break;
- }
-
- if (fdtdec_get_bool(blob, node, "nand-enable-arbiter"))
- pdata->enable_arbiter = 1;
+ pdata->num_cs = dev_read_u32_default(dev, "num-cs", 1);
+ if (pdata->num_cs != 1) {
+ pr_err("pxa3xx driver supports single CS only\n");
+ return -EINVAL;
+ }
- if (fdtdec_get_bool(blob, node, "nand-keep-config"))
- pdata->keep_config = 1;
+ if (dev_read_bool(dev, "nand-enable-arbiter"))
+ pdata->enable_arbiter = 1;
- /*
- * ECC parameters.
- * If these are not set, they will be selected according
- * to the detected flash type.
- */
- /* ECC strength */
- pdata->ecc_strength = fdtdec_get_int(blob, node,
- "nand-ecc-strength", 0);
+ if (dev_read_bool(dev, "nand-keep-config"))
+ pdata->keep_config = 1;
- /* ECC step size */
- pdata->ecc_step_size = fdtdec_get_int(blob, node,
- "nand-ecc-step-size", 0);
-
- info->pdata = pdata;
+ /*
+ * ECC parameters.
+ * If these are not set, they will be selected according
+ * to the detected flash type.
+ */
+ /* ECC strength */
+ pdata->ecc_strength = dev_read_u32_default(dev, "nand-ecc-strength", 0);
- /* Currently support only a single NAND controller */
- return 0;
+ /* ECC step size */
+ pdata->ecc_step_size = dev_read_u32_default(dev, "nand-ecc-step-size",
+ 0);
- } while (node >= 0);
+ info->pdata = pdata;
- return -EINVAL;
+ return 0;
}
-static int pxa3xx_nand_probe(struct pxa3xx_nand_info *info)
+static int pxa3xx_nand_probe(struct udevice *dev)
{
- struct mtd_info *mtd = &info->controller.active->mtd;
struct pxa3xx_nand_platform_data *pdata;
int ret, cs, probe_success;
+ struct pxa3xx_nand_info *info = dev_get_priv(dev);
- ret = pxa3xx_nand_probe_dt(info);
+ ret = pxa3xx_nand_probe_dt(dev, info);
if (ret)
return ret;
pdata = info->pdata;
- ret = alloc_nand_resource(info);
+ ret = alloc_nand_resource(dev, info);
if (ret) {
- dev_err(mtd->dev, "alloc nand resource failed\n");
+ dev_err(dev, "alloc nand resource failed\n");
return ret;
}
@@ -1918,22 +1906,23 @@ static int pxa3xx_nand_probe(struct pxa3xx_nand_info *info)
return 0;
}
-/*
- * Main initialization routine
- */
+U_BOOT_DRIVER(pxa3xx_nand) = {
+ .name = "pxa3xx-nand",
+ .id = UCLASS_MTD,
+ .of_match = pxa3xx_nand_dt_ids,
+ .probe = pxa3xx_nand_probe,
+ .priv_auto_alloc_size = sizeof(struct pxa3xx_nand_info) +
+ sizeof(struct pxa3xx_nand_host) * CONFIG_SYS_MAX_NAND_DEVICE,
+};
+
void board_nand_init(void)
{
- struct pxa3xx_nand_info *info;
- struct pxa3xx_nand_host *host;
+ struct udevice *dev;
int ret;
- info = kzalloc(sizeof(*info) +
- sizeof(*host) * CONFIG_SYS_MAX_NAND_DEVICE,
- GFP_KERNEL);
- if (!info)
- return;
-
- ret = pxa3xx_nand_probe(info);
- if (ret)
- return;
+ ret = uclass_get_device_by_driver(UCLASS_MTD,
+ DM_GET_DRIVER(pxa3xx_nand), &dev);
+ if (ret && ret != -ENODEV)
+ pr_err("Failed to initialize %s. (error %d)\n", dev->name,
+ ret);
