Hi Marek, I have modified the Voipac PXA270 u-boot source code for my customized board. Everything is working fine except suspend/resume. When in u-boot prompt, if unattended for some time (30 seconds), the u-boot hangs. The u-boot is not taking any input from the keyboard, the only way to resume the u-boot is through controller reset.
Which part of the u-boot source code I should concentrate/modify to come of this issue? Thanks and Regards Stephen Paulraj C DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect. -----------------------------------------------------------------------------------------------------------------------
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
