Dne Út 5. října 2010 05:11:45 StephenPaulraj Chinnadurai-ERS,HCLTech napsal(a): > Hi Marek, > > I have modified the Voipac PXA270 u-boot source code for my customized > board. Everything is working fine except suspend/resume. When in u-boot > prompt, if unattended for some time (30 seconds), the u-boot hangs. The > u-boot is not taking any input from the keyboard, the only way to resume > the u-boot is through controller reset.
Does the CPU hang? or does it end in some other than svc mode ? or what ? > > Which part of the u-boot source code I should concentrate/modify to come of > this issue? Hardware ... > > Thanks and Regards > Stephen Paulraj C > > > > DISCLAIMER: > --------------------------------------------------------------------------- > -------------------------------------------- > > The contents of this e-mail and any attachment(s) are confidential and > intended for the named recipient(s) only. It shall not attach any > liability on the originator or HCL or its affiliates. Any views or > opinions presented in this email are solely those of the author and may > not necessarily reflect the opinions of HCL or its affiliates. Any form of > reproduction, dissemination, copying, disclosure, modification, > distribution and / or publication of this message without the prior > written consent of the author of this e-mail is strictly prohibited. If > you have received this email in error please delete it and notify the > sender immediately. Before opening any mail and attachments please check > them for viruses and defect. > > --------------------------------------------------------------------------- > -------------------------------------------- _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
