On Mon, 11 Jan 2021 21:11:41 +0100 Jernej Skrabec <jernej.skra...@siol.net> wrote:
> This port is used for debug terminal on all known H616 boards. > > Reviewed-by: Samuel Holland <sam...@sholland.org> > Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net> Compared the bits against the manual. Reviewed-by: Andre Przywara <andre.przyw...@arm.com> Cheers, Andre > --- > arch/arm/include/asm/arch-sunxi/gpio.h | 1 + > arch/arm/mach-sunxi/board.c | 4 ++++ > 2 files changed, 5 insertions(+) > > diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h > b/arch/arm/include/asm/arch-sunxi/gpio.h > index f817d328f432..cdb7dbd5b8e5 100644 > --- a/arch/arm/include/asm/arch-sunxi/gpio.h > +++ b/arch/arm/include/asm/arch-sunxi/gpio.h > @@ -206,6 +206,7 @@ enum sunxi_gpio_number { > #define SUN6I_GPH_UART0 2 > #define SUN9I_GPH_UART0 2 > #define SUN50I_H6_GPH_UART0 2 > +#define SUN50I_H616_GPH_UART0 2 > > #define SUNXI_GPI_SDC3 2 > #define SUN7I_GPI_TWI3 3 > diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c > index 8ed9a87c1195..a883edd24107 100644 > --- a/arch/arm/mach-sunxi/board.c > +++ b/arch/arm/mach-sunxi/board.c > @@ -116,6 +116,10 @@ static int gpio_init(void) > sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H6_GPH_UART0); > sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H6_GPH_UART0); > sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP); > +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I_H616) > + sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H616_GPH_UART0); > + sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H616_GPH_UART0); > + sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP); > #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T) > sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0); > sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);