Hi Tim,
On 06.02.21 01:11, Tim Harvey wrote:
Add initial support for Gateworks Venice product family based on the
i.MX 8M Mini SoC
Signed-off-by: Tim Harvey <thar...@gateworks.com>
---
[snip]
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index c455f7b..7117650 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -43,7 +43,13 @@ config TARGET_IMX8MM_EVK
select SUPPORT_SPL
select IMX8M_LPDDR4
-config TARGET_IMX8MN_DDR4_EVK
This board is silently dropped...
+config TARGET_IMX8MM_VENICE
+ bool "Support Gateworks Venice iMX8M Mini module"
+ select IMX8MM
+ select SUPPORT_SPL
+ select IMX8M_LPDDR4
+
This is your board, ok
+config TARGET_IMX8MN_EVK
and this is the old board with wrong name. Somethin went wrong....
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================