On Mon, Mar 1, 2021 at 8:04 AM Stefano Babic <sba...@denx.de> wrote: > > Hi Tim, > > On 06.02.21 01:11, Tim Harvey wrote: > > Add initial support for Gateworks Venice product family based on the > > i.MX 8M Mini SoC > > > > Signed-off-by: Tim Harvey <thar...@gateworks.com> > > --- > > [snip] > > > diff --git a/arch/arm/mach-imx/imx8m/Kconfig > > b/arch/arm/mach-imx/imx8m/Kconfig > > index c455f7b..7117650 100644 > > --- a/arch/arm/mach-imx/imx8m/Kconfig > > +++ b/arch/arm/mach-imx/imx8m/Kconfig > > @@ -43,7 +43,13 @@ config TARGET_IMX8MM_EVK > > select SUPPORT_SPL > > select IMX8M_LPDDR4 > > > > -config TARGET_IMX8MN_DDR4_EVK > > This board is silently dropped... > > > +config TARGET_IMX8MM_VENICE > > + bool "Support Gateworks Venice iMX8M Mini module" > > + select IMX8MM > > + select SUPPORT_SPL > > + select IMX8M_LPDDR4 > > + > > This is your board, ok > > > +config TARGET_IMX8MN_EVK > > and this is the old board with wrong name. Somethin went wrong.... >
Stefano, Oops... looks like I lost that in a rebase. Does everything else look good or should I wait for further review before sending a v3? Thanks, Tim