From: "Ying-Chun Liu (PaulLiu)" <paul....@linaro.org>

Document the bindings for fsl,anatop-regulator

Signed-off-by: Ying-Chun Liu (PaulLiu) <paul....@linaro.org>
---
 .../regulator/fsl,anatop-regulator.txt        | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt

diff --git a/doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt 
b/doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt
new file mode 100644
index 0000000000..2a60e4941b
--- /dev/null
+++ b/doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt
@@ -0,0 +1,45 @@
+ANATOP REGULATOR
+
+Anatop is an integrated regulator inside i.MX6 SoC.
+
+Required properties:
+- compatible:          Must be "fsl,anatop-regulator".
+- regulator-name:      Name of the regulator
+- anatop-reg-offset:   u32 value representing the anatop MFD register offset.
+- anatop-vol-bit-shift:        u32 value representing the bit shift for the 
register.
+- anatop-vol-bit-width:        u32 value representing the number of bits used 
in the
+                       register.
+- anatop-min-bit-val:  u32 value representing the minimum value of this
+                       register.
+- anatop-min-voltage:  u32 value representing the minimum voltage of this
+                       regulator.
+- anatop-max-voltage:  u32 value representing the maximum voltage of this
+                       regulator.
+
+Optional properties:
+- anatop-delay-reg-offset: u32 value representing the anatop MFD step time
+                          register offset.
+- anatop-delay-bit-shift: u32 value representing the bit shift for the step
+                         time register.
+- anatop-delay-bit-width: u32 value representing the number of bits used in
+                         the step time register.
+- anatop-enable-bit:     u32 value representing regulator enable bit offset.
+- vin-supply:            input supply phandle.
+
+Example:
+       regulator-vddpu {
+               compatible = "fsl,anatop-regulator";
+               regulator-name = "vddpu";
+               regulator-min-microvolt = <725000>;
+               regulator-max-microvolt = <1300000>;
+               regulator-always-on;
+               anatop-reg-offset = <0x140>;
+               anatop-vol-bit-shift = <9>;
+               anatop-vol-bit-width = <5>;
+               anatop-delay-reg-offset = <0x170>;
+               anatop-delay-bit-shift = <24>;
+               anatop-delay-bit-width = <2>;
+               anatop-min-bit-val = <1>;
+               anatop-min-voltage = <725000>;
+               anatop-max-voltage = <1300000>;
+       };
-- 
2.30.1

Reply via email to