> The change may be dedicated to sama5d2 devices. Could you have a look > please if your device (sama5d3) needs this change as well ? I mean, does > doing something similar for sama5d3 fixes your problem ?
I am not quite sure how to check what you suggest to be honest. The commit you've sent seems to be board independent -> mach-at91/spl_atmel.c. Doesn't it apply to all of the at91 boards, sama5d3 inclusive? I don't see where else I could make a change like that. Thanks for your patience. On Tue, 23 Mar 2021 at 11:38, <eugen.hris...@microchip.com> wrote: > On 3/23/21 1:28 PM, Manuel Luís Reis wrote: > > > Hi, > > > > Thanks for your reply. > > > > > Can you please check if this commit is in your tree, or, if the same > has > > > to be applied in your case (sama5d3), to make it work ? > > > > I've got that change in my tree, but I'm still getting the error message. > > The change may be dedicated to sama5d2 devices. Could you have a look > please if your device (sama5d3) needs this change as well ? I mean, does > doing something similar for sama5d3 fixes your problem ? > > Thanks, > Eugen > > > > > I am using up-to-date mainline U-Boot. > > > > Thanks > > > > > > > > On Tue, 23 Mar 2021 at 11:14, <eugen.hris...@microchip.com > > <mailto:eugen.hris...@microchip.com>> wrote: > > > > Hi, > > > > Can you please check if this commit is in your tree, or, if the same > > has > > to be applied in your case (sama5d3), to make it work ? > > > > Here is the commit : > > > > > > > https://source.denx.de/u-boot/custodians/u-boot-atmel/-/commit/786f35b619ddbfb88e4532d11a56413f5dab473f > > > > > > > > On 3/23/21 1:06 PM, Manuel Luís Reis wrote: > > > Hello, > > > > > > I've been having issues with SPL booting in the SAMA5D3 Xplained > > board > > > getting the following error, with up-to-date mainline U-boot and > > > sama5d3_xplained _mmc_defconfig: > > > > > > ----------------------------------------------- > > > RomBOOT > > > > > > <debug_uart> > > > Could not initialize timer (err -19) > > > ..... > > > ----------------------------------------------- > > > > > > I could trace back the error to commit 4b2be78. > > > > > > This topic has been raised before on > > > > > > http://u-boot.10912.n7.nabble.com/PATCH-v2-time-Fix-get-ticks-being-non-monotonic-td426172.html > > > Tried the suggestions there with the same result. > > > > > > I'm am not too knowledgeable with U-Boot nor this board. Could > > you shed > > > some light on this? Any pointers would be appreciated. > > > > > > Let me know if you require additional information. > > > > > > Cheers, > > > Manuel > > > > > > Output from dm_dump_all(): > > > > > > Class Index Probed Driver Name > > > ----------------------------------------------------------- > > > root 0 [ + ] root_driver root_driver > > > simple_bus 0 [ ] simple_bus `-- ahb > > > simple_bus 1 [ ] simple_bus `-- apb > > > mmc 0 [ ] atmel-mci |-- mmc@f0000000 > > > blk 0 [ ] mmc_blk | `-- m...@f0000000.blk > > > mmc 1 [ ] atmel-mci |-- mmc@f8000000 > > > blk 1 [ ] mmc_blk | `-- m...@f8000000.blk > > > serial 0 [ ] serial_atmel |-- serial@ffffee00 > > > pinctrl 0 [ ] atmel_sama5d3_pinctrl |-- > > pinctrl@fffff200 > > > pinconfig 0 [ ] pinconfig | |-- dbgu > > > pinconfig 1 [ ] pinconfig | | `-- dbgu-0 > > > pinconfig 2 [ ] pinconfig | |-- mmc0 > > > pinconfig 3 [ ] pinconfig | | |-- > > mmc0_clk_cmd_dat0 > > > pinconfig 4 [ ] pinconfig | | |-- mmc0_dat1_3 > > > pinconfig 5 [ ] pinconfig | | `-- mmc0_dat4_7 > > > pinconfig 6 [ ] pinconfig | |-- mmc1 > > > pinconfig 7 [ ] pinconfig | | |-- > > mmc1_clk_cmd_dat0 > > > pinconfig 8 [ ] pinconfig | | `-- mmc1_dat1_3 > > > pinconfig 9 [ ] pinconfig | |-- spi0 > > > pinconfig 10 [ ] pinconfig | | `-- spi0-0 > > > pinconfig 11 [ ] pinconfig | |-- spi1 > > > pinconfig 12 [ ] pinconfig | | `-- spi1-0 > > > pinconfig 13 [ ] pinconfig | `-- board > > > pinconfig 14 [ ] pinconfig | |-- mmc0_cd > > > pinconfig 15 [ ] pinconfig | `-- mmc1_cd > > > gpio 0 [ ] atmel_at91rm9200_gpio |-- > gpio@fffff200 > > > gpio 1 [ ] atmel_at91rm9200_gpio |-- > gpio@fffff400 > > > gpio 2 [ ] atmel_at91rm9200_gpio |-- > gpio@fffff600 > > > gpio 3 [ ] atmel_at91rm9200_gpio |-- > gpio@fffff800 > > > gpio 4 [ ] atmel_at91rm9200_gpio |-- > gpio@fffffa00 > > > simple_bus 2 [ ] at91-pmc `-- pmc@fffffc00 > > > clk 0 [ ] at91sam9x5-utmi-clk |-- utmick > > > clk 1 [ ] at91-master-clk |-- masterck > > > misc 0 [ ] sam9x5-periph-clk `-- periphck > > > clk 2 [ ] periph-clk |-- dbgu_clk@2 > > > clk 3 [ ] periph-clk |-- pioA_clk@6 > > > clk 4 [ ] periph-clk |-- pioB_clk@7 > > > clk 5 [ ] periph-clk |-- pioC_clk@8 > > > clk 6 [ ] periph-clk |-- pioD_clk@9 > > > clk 7 [ ] periph-clk |-- pioE_clk@10 > > > clk 8 [ ] periph-clk |-- mci0_clk@21 > > > clk 9 [ ] periph-clk |-- mci1_clk@22 > > > clk 10 [ ] periph-clk |-- spi0_clk@24 > > > clk 11 [ ] periph-clk `-- spi1_clk@25 > > > Could not initialize timer (err -19) > > > > > > >