Hi again, FYI: As a small test I commented out the change you mentioned but got the same mistake. Begs to wonder if it is related to the issue at hand.
Going back to http://u-boot.10912.n7.nabble.com/PATCH-v2-time-Fix-get-ticks-being-non-monotonic-td426172.html Sean Anderson asks: "So nothing here is probed, but additionally nothing has UCLASS_TIMER. What do you expect the timer device to be?" Is the timer missing for SAMA5D3 board? I cannot find it in /drivers/timer, other than mchp-pit64b-timer.c, which doesn't seem to be used ins this particular board as far as I could tell. Any thoughts on how to fix this? Anything I can do to help? Cheers On Tue, 23 Mar 2021 at 13:20, Manuel Luís Reis <mluis.r...@gmail.com> wrote: > > > The change may be dedicated to sama5d2 devices. Could you have a look > > please if your device (sama5d3) needs this change as well ? I mean, does > > doing something similar for sama5d3 fixes your problem ? > > I am not quite sure how to check what you suggest to be honest. > > The commit you've sent seems to be board independent -> > mach-at91/spl_atmel.c. Doesn't it apply to all of the at91 boards, sama5d3 > inclusive? > I don't see where else I could make a change like that. > > Thanks for your patience. > > > > On Tue, 23 Mar 2021 at 11:38, <eugen.hris...@microchip.com> wrote: > >> On 3/23/21 1:28 PM, Manuel Luís Reis wrote: >> >> > Hi, >> > >> > Thanks for your reply. >> > >> > > Can you please check if this commit is in your tree, or, if the same >> has >> > > to be applied in your case (sama5d3), to make it work ? >> > >> > I've got that change in my tree, but I'm still getting the error >> message. >> >> The change may be dedicated to sama5d2 devices. Could you have a look >> please if your device (sama5d3) needs this change as well ? I mean, does >> doing something similar for sama5d3 fixes your problem ? >> >> Thanks, >> Eugen >> >> > >> > I am using up-to-date mainline U-Boot. >> > >> > Thanks >> > >> > >> > >> > On Tue, 23 Mar 2021 at 11:14, <eugen.hris...@microchip.com >> > <mailto:eugen.hris...@microchip.com>> wrote: >> > >> > Hi, >> > >> > Can you please check if this commit is in your tree, or, if the same >> > has >> > to be applied in your case (sama5d3), to make it work ? >> > >> > Here is the commit : >> > >> > >> > >> https://source.denx.de/u-boot/custodians/u-boot-atmel/-/commit/786f35b619ddbfb88e4532d11a56413f5dab473f >> > >> > >> > >> > On 3/23/21 1:06 PM, Manuel Luís Reis wrote: >> > > Hello, >> > > >> > > I've been having issues with SPL booting in the SAMA5D3 Xplained >> > board >> > > getting the following error, with up-to-date mainline U-boot and >> > > sama5d3_xplained _mmc_defconfig: >> > > >> > > ----------------------------------------------- >> > > RomBOOT >> > > >> > > <debug_uart> >> > > Could not initialize timer (err -19) >> > > ..... >> > > ----------------------------------------------- >> > > >> > > I could trace back the error to commit 4b2be78. >> > > >> > > This topic has been raised before on >> > > >> > >> http://u-boot.10912.n7.nabble.com/PATCH-v2-time-Fix-get-ticks-being-non-monotonic-td426172.html >> > > Tried the suggestions there with the same result. >> > > >> > > I'm am not too knowledgeable with U-Boot nor this board. Could >> > you shed >> > > some light on this? Any pointers would be appreciated. >> > > >> > > Let me know if you require additional information. >> > > >> > > Cheers, >> > > Manuel >> > > >> > > Output from dm_dump_all(): >> > > >> > > Class Index Probed Driver Name >> > > ----------------------------------------------------------- >> > > root 0 [ + ] root_driver root_driver >> > > simple_bus 0 [ ] simple_bus `-- ahb >> > > simple_bus 1 [ ] simple_bus `-- apb >> > > mmc 0 [ ] atmel-mci |-- mmc@f0000000 >> > > blk 0 [ ] mmc_blk | `-- m...@f0000000.blk >> > > mmc 1 [ ] atmel-mci |-- mmc@f8000000 >> > > blk 1 [ ] mmc_blk | `-- m...@f8000000.blk >> > > serial 0 [ ] serial_atmel |-- serial@ffffee00 >> > > pinctrl 0 [ ] atmel_sama5d3_pinctrl |-- >> > pinctrl@fffff200 >> > > pinconfig 0 [ ] pinconfig | |-- dbgu >> > > pinconfig 1 [ ] pinconfig | | `-- dbgu-0 >> > > pinconfig 2 [ ] pinconfig | |-- mmc0 >> > > pinconfig 3 [ ] pinconfig | | |-- >> > mmc0_clk_cmd_dat0 >> > > pinconfig 4 [ ] pinconfig | | |-- >> mmc0_dat1_3 >> > > pinconfig 5 [ ] pinconfig | | `-- >> mmc0_dat4_7 >> > > pinconfig 6 [ ] pinconfig | |-- mmc1 >> > > pinconfig 7 [ ] pinconfig | | |-- >> > mmc1_clk_cmd_dat0 >> > > pinconfig 8 [ ] pinconfig | | `-- >> mmc1_dat1_3 >> > > pinconfig 9 [ ] pinconfig | |-- spi0 >> > > pinconfig 10 [ ] pinconfig | | `-- spi0-0 >> > > pinconfig 11 [ ] pinconfig | |-- spi1 >> > > pinconfig 12 [ ] pinconfig | | `-- spi1-0 >> > > pinconfig 13 [ ] pinconfig | `-- board >> > > pinconfig 14 [ ] pinconfig | |-- mmc0_cd >> > > pinconfig 15 [ ] pinconfig | `-- mmc1_cd >> > > gpio 0 [ ] atmel_at91rm9200_gpio |-- >> gpio@fffff200 >> > > gpio 1 [ ] atmel_at91rm9200_gpio |-- >> gpio@fffff400 >> > > gpio 2 [ ] atmel_at91rm9200_gpio |-- >> gpio@fffff600 >> > > gpio 3 [ ] atmel_at91rm9200_gpio |-- >> gpio@fffff800 >> > > gpio 4 [ ] atmel_at91rm9200_gpio |-- >> gpio@fffffa00 >> > > simple_bus 2 [ ] at91-pmc `-- pmc@fffffc00 >> > > clk 0 [ ] at91sam9x5-utmi-clk |-- utmick >> > > clk 1 [ ] at91-master-clk |-- masterck >> > > misc 0 [ ] sam9x5-periph-clk `-- periphck >> > > clk 2 [ ] periph-clk |-- dbgu_clk@2 >> > > clk 3 [ ] periph-clk |-- pioA_clk@6 >> > > clk 4 [ ] periph-clk |-- pioB_clk@7 >> > > clk 5 [ ] periph-clk |-- pioC_clk@8 >> > > clk 6 [ ] periph-clk |-- pioD_clk@9 >> > > clk 7 [ ] periph-clk |-- pioE_clk@10 >> > > clk 8 [ ] periph-clk |-- mci0_clk@21 >> > > clk 9 [ ] periph-clk |-- mci1_clk@22 >> > > clk 10 [ ] periph-clk |-- spi0_clk@24 >> > > clk 11 [ ] periph-clk `-- spi1_clk@25 >> > > Could not initialize timer (err -19) >> > > >> > >> >>