From: Breno Lima <breno.l...@nxp.com>
When building 32-bit targets with CONFIG_SECURE_BOOT and DEBUG enabled
the following warnings are displayed:
arch/arm/mach-imx/hab.c:840:41: warning: format '%lx' expects argument \
of type 'long unsigned int', but argument 3 has type 'uint32_t \
{aka unsigned int}' [-Wformat=]
printf("HAB check target 0x%08x-0x%08lx fail\n",
~~~~^
%08x
ddr_start, ddr_start + bytes);
arch/arm/mach-imx/hab.c:845:45: warning: format '%x' expects argument \
of type 'unsigned int', but argument 3 has type 'ulong \
{aka long unsigned int}' [-Wformat=]
printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", ivt_offset, ivt_addr);
~^
%lx
Fix warnings by providing the correct data type.
Reviewed-by: Ye Li <ye...@nxp.com>
Signed-off-by: Breno Lima <breno.l...@nxp.com>
Signed-off-by: Peng Fan <peng....@nxp.com>
---
arch/arm/mach-imx/hab.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c
index 469ef0fd1c..00bd157d0e 100644
--- a/arch/arm/mach-imx/hab.c
+++ b/arch/arm/mach-imx/hab.c
@@ -923,11 +923,11 @@ int imx_hab_authenticate_image(uint32_t ddr_start,
uint32_t image_size,
status = hab_rvt_check_target(HAB_TGT_MEMORY, (void *)(ulong)ddr_start,
bytes);
if (status != HAB_SUCCESS) {
printf("HAB check target 0x%08x-0x%08lx fail\n",
- ddr_start, ddr_start + bytes);
+ ddr_start, ddr_start + (ulong)bytes);
goto hab_exit_failure_print_status;
}
#ifdef DEBUG
- printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", ivt_offset, ivt_addr);
+ printf("\nivt_offset = 0x%x, ivt addr = 0x%lx\n", ivt_offset, ivt_addr);
printf("ivt entry = 0x%08x, dcd = 0x%08x, csf = 0x%08x\n", ivt->entry,
ivt->dcd, ivt->csf);
puts("Dumping IVT\n");
--
2.25.1
