On Fri, Jul 2, 2021 at 4:49 PM Teresa Remmet <t.rem...@phytec.de> wrote:
>
> Use now binman for image creation.
>
> Signed-off-by: Teresa Remmet <t.rem...@phytec.de>
> ---
> .../imx8mp-phyboard-pollux-rdk-u-boot.dtsi | 105 ++++++++++++++++++
> arch/arm/mach-imx/imx8m/Kconfig | 1 +
> .../phytec/phycore_imx8mp/imximage-8mp-sd.cfg | 10 ++
> configs/phycore-imx8mp_defconfig | 4 +-
> 4 files changed, 118 insertions(+), 2 deletions(-)
> create mode 100644 board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg
>
> diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
> b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
> index dbc48dfb4841..2b8e77cb27c5 100644
> --- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
> @@ -7,6 +7,10 @@
> #include "imx8mp-u-boot.dtsi"
>
> / {
> + binman: binman {
> + multiple-images;
> + };
> +
> wdt-reboot {
> compatible = "wdt-reboot";
> wdt = <&wdog1>;
> @@ -81,3 +85,104 @@
> &wdog1 {
> u-boot,dm-spl;
> };
> +
> +&binman {
> + u-boot-spl-ddr {
> + filename = "u-boot-spl-ddr.bin";
> + pad-byte = <0xff>;
> + align-size = <4>;
> + align = <4>;
> +
> + u-boot-spl {
> + align-end = <4>;
> + };
> +
> + blob_1: blob-ext@1 {
> + filename = "lpddr4_pmu_train_1d_imem_202006.bin";
> + size = <0x8000>;
> + };
> +
> + blob_2: blob-ext@2 {
> + filename = "lpddr4_pmu_train_1d_dmem_202006.bin";
> + size = <0x4000>;
> + };
> +
> + blob_3: blob-ext@3 {
> + filename = "lpddr4_pmu_train_2d_imem_202006.bin";
> + size = <0x8000>;
> + };
> +
> + blob_4: blob-ext@4 {
> + filename = "lpddr4_pmu_train_2d_dmem_202006.bin";
> + size = <0x4000>;
> + };
> + };
> +
> + flash {
> + mkimage {
> + args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e
> 0x920000";
> +
> + blob {
> + filename = "u-boot-spl-ddr.bin";
> + };
> + };
> + };
> +
> + itb {
> + filename = "u-boot.itb";
> +
> + fit {
> + description = "Configuration to load ATF before
> U-Boot";
> + #address-cells = <1>;
> + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
> +
> + images {
> + uboot {
> + description = "U-Boot (64-bit)";
> + type = "standalone";
> + arch = "arm64";
> + compression = "none";
> + load = <CONFIG_SYS_TEXT_BASE>;
> +
> + uboot_blob: blob-ext {
> + filename = "u-boot-nodtb.bin";
> + };
> + };
> +
> + atf {
> + description = "ARM Trusted Firmware";
> + type = "firmware";
> + arch = "arm64";
> + compression = "none";
> + load = <0x970000>;
> + entry = <0x970000>;
> +
> + atf_blob: blob-ext {
> + filename = "bl31.bin";
> + };
> + };
> +
> + fdt {
> + description = "NAME";
> + type = "flat_dt";
> + compression = "none";
> +
> + uboot_fdt_blob: blob-ext {
> + filename = "u-boot.dtb";
> + };
> + };
> + };
> +
> + configurations {
> + default = "conf";
> +
> + conf {
> + description = "NAME";
> + firmware = "uboot";
> + loadables = "atf";
> + fdt = "fdt";
> + };
> + };
> + };
> + };
> +};
I think this will increase the same copy of its in respective boards
with changes in ddr names. Better to have common script to update the
final its by taking ddr files via env, like it was done in Rockchip,
Allwinner.
Jagan.
