Dear Darius, >> Now running in RAM - U-Boot at: 57fbe000 >> NAND: raise: Signal # 8 caught >> raise: Signal # 8 caught >> raise: Signal # 8 caught > > This looks suspect to me. Seems to me some early init > (pin setup? clocks?) is not OK. If you have early inits, > you must do that now in board_early_init_f() (and you > have to define CONFIG_BOARD_EARLY_INIT_F to enable this > feature) I got _exactly_ the same NAND messages when ARM relocation was first used, because the timer.c did use static variables which are not working before relocation. Have a look at your timer implementation.
Best Regards, Reinhard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot