Move the function get_boot_device() from spl.c to cpu.c. Make it visible, so that it may be used from other files.
Signed-off-by: Marek Behún <marek.be...@nic.cz> --- arch/arm/mach-mvebu/cpu.c | 60 ++++++++++++++++++++ arch/arm/mach-mvebu/include/mach/cpu.h | 2 + arch/arm/mach-mvebu/spl.c | 77 +++----------------------- 3 files changed, 71 insertions(+), 68 deletions(-) diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 0b935c46fb..daf8bd66a0 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -14,6 +14,7 @@ #include <asm/pl310.h> #include <asm/arch/cpu.h> #include <asm/arch/soc.h> +#include <asm/spl.h> #include <sdhci.h> #define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) @@ -80,6 +81,65 @@ int mvebu_soc_family(void) return MVEBU_SOC_UNKNOWN; } +u32 get_boot_device(void) +{ + u32 val; + u32 boot_device; + + /* + * First check, if UART boot-mode is active. This can only + * be done, via the bootrom error register. Here the + * MSB marks if the UART mode is active. + */ + val = readl(CONFIG_BOOTROM_ERR_REG); + boot_device = (val & BOOTROM_ERR_MODE_MASK) >> BOOTROM_ERR_MODE_OFFS; + debug("BOOTROM_REG=0x%08x boot_device=0x%x\n", val, boot_device); + if (boot_device == BOOTROM_ERR_MODE_UART) + return BOOT_DEVICE_UART; + +#ifdef CONFIG_ARMADA_38X + /* + * If the bootrom error code contains any other than zeros it's an + * error condition and the bootROM has fallen back to UART boot + */ + boot_device = (val & BOOTROM_ERR_CODE_MASK) >> BOOTROM_ERR_CODE_OFFS; + if (boot_device) + return BOOT_DEVICE_UART; +#endif + + /* + * Now check the SAR register for the strapped boot-device + */ + val = readl(CONFIG_SAR_REG); /* SAR - Sample At Reset */ + boot_device = (val & BOOT_DEV_SEL_MASK) >> BOOT_DEV_SEL_OFFS; + debug("SAR_REG=0x%08x boot_device=0x%x\n", val, boot_device); + switch (boot_device) { +#ifdef BOOT_FROM_NAND + case BOOT_FROM_NAND: + return BOOT_DEVICE_NAND; +#endif +#ifdef BOOT_FROM_MMC + case BOOT_FROM_MMC: + case BOOT_FROM_MMC_ALT: + return BOOT_DEVICE_MMC1; +#endif + case BOOT_FROM_UART: +#ifdef BOOT_FROM_UART_ALT + case BOOT_FROM_UART_ALT: +#endif + return BOOT_DEVICE_UART; +#ifdef BOOT_FROM_SATA + case BOOT_FROM_SATA: + case BOOT_FROM_SATA_ALT: + return BOOT_DEVICE_SATA; +#endif + case BOOT_FROM_SPI: + return BOOT_DEVICE_SPI; + default: + return BOOT_DEVICE_BOOTROM; + }; +} + #if defined(CONFIG_DISPLAY_CPUINFO) #if defined(CONFIG_ARMADA_375) diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h index 79858858c2..a7a62c7e7d 100644 --- a/arch/arm/mach-mvebu/include/mach/cpu.h +++ b/arch/arm/mach-mvebu/include/mach/cpu.h @@ -148,6 +148,8 @@ void __noreturn return_to_bootrom(void); int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks); #endif +u32 get_boot_device(void); + void get_sar_freq(struct sar_freq_modes *sar_freq); /* diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c index f0cf60bb14..8d6d4902f6 100644 --- a/arch/arm/mach-mvebu/spl.c +++ b/arch/arm/mach-mvebu/spl.c @@ -171,74 +171,6 @@ int spl_parse_board_header(struct spl_image_info *spl_image, return 0; } -static u32 get_boot_device(void) -{ - u32 val; - u32 boot_device; - - /* - * First check, if UART boot-mode is active. This can only - * be done, via the bootrom error register. Here the - * MSB marks if the UART mode is active. - */ - val = readl(CONFIG_BOOTROM_ERR_REG); - boot_device = (val & BOOTROM_ERR_MODE_MASK) >> BOOTROM_ERR_MODE_OFFS; - debug("BOOTROM_REG=0x%08x boot_device=0x%x\n", val, boot_device); - if (boot_device == BOOTROM_ERR_MODE_UART) - return BOOT_DEVICE_UART; - -#ifdef CONFIG_ARMADA_38X - /* - * If the bootrom error code contains any other than zeros it's an - * error condition and the bootROM has fallen back to UART boot - */ - boot_device = (val & BOOTROM_ERR_CODE_MASK) >> BOOTROM_ERR_CODE_OFFS; - if (boot_device) - return BOOT_DEVICE_UART; -#endif - - /* - * Now check the SAR register for the strapped boot-device - */ - val = readl(CONFIG_SAR_REG); /* SAR - Sample At Reset */ - boot_device = (val & BOOT_DEV_SEL_MASK) >> BOOT_DEV_SEL_OFFS; - debug("SAR_REG=0x%08x boot_device=0x%x\n", val, boot_device); - switch (boot_device) { -#ifdef BOOT_FROM_NAND - case BOOT_FROM_NAND: - return BOOT_DEVICE_NAND; -#endif -#ifdef BOOT_FROM_MMC - case BOOT_FROM_MMC: - case BOOT_FROM_MMC_ALT: - return BOOT_DEVICE_MMC1; -#endif - case BOOT_FROM_UART: -#ifdef BOOT_FROM_UART_ALT - case BOOT_FROM_UART_ALT: -#endif - return BOOT_DEVICE_UART; -#ifdef BOOT_FROM_SATA - case BOOT_FROM_SATA: - case BOOT_FROM_SATA_ALT: - return BOOT_DEVICE_SATA; -#endif - case BOOT_FROM_SPI: - return BOOT_DEVICE_SPI; - default: - return BOOT_DEVICE_BOOTROM; - }; -} - -#else - -static u32 get_boot_device(void) -{ - return BOOT_DEVICE_BOOTROM; -} - -#endif - u32 spl_boot_device(void) { u32 boot_device = get_boot_device(); @@ -285,6 +217,15 @@ u32 spl_boot_device(void) } } +#else + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_BOOTROM; +} + +#endif + int board_return_to_bootrom(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) { -- 2.31.1