On Mon, 16 Aug 2021 14:50:15 +0200 Stefan Roese <s...@denx.de> wrote:
> > - disable_mcu_watchdog(); > > + /* > > + * If not booting from UART, MCU watchdog was not disabled > > in SPL, > > + * disable it now. > > + */ > > + if (get_boot_device() != BOOT_DEVICE_UART) > > + disable_mcu_watchdog(); > > Why do you disable the MCU watchdog here in U-Boot proper? Hi Stefan, this is just where it was before. But looking at the prompt SoC: MV88F6820-A0 at 1600 MHz DRAM: 2 GiB (800 MHz, 32-bit, 2T, ECC not enabled) Disabling MCU watchdog... disabled WDT: Started with servicing (60s timeout) it looks like U-Boot's watchdog is being enabled after MCU watchdog. It would be better to enable U-Boot's WDT before disabling MCU watchdog. I will send another patch that moves it to another function, board_late_init for example. Shall I resend this series with this new patch? Marek